EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Alkali-Polymer Flooding in an Austrian Brownfield: From Laboratory to Field—Insights

Muhammad Tahir iD, Rafael Hincapie iD, Torsten Clemens iD, Dominik Steineder, Amir Farzaneh, Silvan Mikulic iD

Polymers · 23.12.2024 · 16 (24) · 3607

DOI: 10.3390/polym16243607 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 23.12.2024. Verfasst von Muhammad Tahir und 5 weiteren Autor:innen. Beteiligte Einrichtung: OMV Exploration & Production GmbH, 1020 Vienna, Austria. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 49 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

We focus on optimizing oil displacement in brownfields using alkali polymers (AP) flooding. The goal is to enhance rock–fluid and fluid–fluid interactions to improve oil recovery. The evaluation includes detailed screening of AP mixtures to ensure cost-effectiveness and maximize chemical slug efficiency, using an AP pilot project in Austria as a case study. Key aspects of the study involve assessing fluid properties to select appropriate chemical concentrations. Important parameters include the stability of produced emulsions, interfacial tension (IFT) measurements, and rheological analyses. Rock–fluid interactions were examined through core flooding experiments on both low- and high-permeability core plugs to understand fluid dynamics in heterogeneous reservoirs. A novel part of the research involved simulating the in situ aging of the AP slug, which increases its anionicity over time. Two-phase core flooding with aged chemicals provided insights into the evolution of chemical effectiveness and interactions. We found that an alkali concentration of 7500 ppm was optimal for the AP slug, particularly in its interaction with dead oil with a high total acid number (TAN), leading to emulsions with microscopic instability. Single-phase core flooding showed that the AP slug from Vendor B outperformed that from Vendor A despite mechanical stability issues. However, the additional recovery factor (RF) for polymer A-based slugs was higher in both high- and low-permeability core plugs. The findings suggest that in situ aging of the AP slug could reduce costs and enhance injection performance.

Schlagwörter

Stichwörter der Autor:innen

alkali-polymeremulsionsheterogeneousinterfacial tensionpilot projectrecovery factor

Autor:innen und Institutionen

  • OMV Exploration & Production GmbH, 1020 Vienna, Austria.

ORCID-Profile: Muhammad Tahir, Rafael Hincapie, Torsten Clemens, Silvan Mikulic

Zitieren

APA

Tahir, M., Hincapie, R., Clemens, T., Steineder, D., Farzaneh, A., & Mikulic, S. (2024). Alkali-Polymer Flooding in an Austrian Brownfield: From Laboratory to Field—Insights. Polymers, 16(24), 3607. https://doi.org/10.3390/polym16243607

Vancouver

Tahir M, Hincapie R, Clemens T, Steineder D, Farzaneh A, Mikulic S. Alkali-Polymer Flooding in an Austrian Brownfield: From Laboratory to Field—Insights. Polymers. 2024;16(24):3607. doi:10.3390/polym16243607

BibTeX
@article{Tahir2024,
  author = {Tahir, Muhammad and Hincapie, Rafael and Clemens, Torsten and Steineder, Dominik and Farzaneh, Amir and Mikulic, Silvan},
  title = {Alkali-Polymer Flooding in an Austrian Brownfield: From Laboratory to Field—Insights},
  journal = {Polymers},
  year = {2024},
  volume = {16},
  number = {24},
  pages = {3607},
  doi = {10.3390/polym16243607}
}
Kostenlos starten →