EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Temperature Areas of Local Inelasticity in Polyoxymethylene

Viktor A Lomovskoy iD, Svetlana A Shatokhina iD, Raisa A Alekhina iD, Nadezhda Yu Lomovskaya iD

Polymers · 21.12.2024 · 16 (24) · 3582

DOI: 10.3390/polym16243582 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 21.12.2024. Verfasst von Viktor A Lomovskoy und 3 weiteren Autor:innen. Beteiligte Einrichtung: Frumkin Institute of Physical Chemistry and Electrochemistry, Russian Academy of Sciences (IPCE RAS), Leninskiy Prospekt 31, 119071 Moscow, Russia. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 66 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Science and Higher Education of the Russian Federation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The spectra of internal friction and temperature dependencies of the frequency of a free-damped oscillation process excited in the specimens of an amorphous–crystalline copolymer of polyoxymethylene with the co-monomer trioxane (POM-C) with a degree of crystallinity ~60% in the temperature range from −150 °C to +170 °C has been studied. It has been established that the spectra of internal friction show five local dissipative processes of varying intensity, manifested in different temperature ranges of the spectrum. An anomalous decrease in the frequency of the oscillatory process was detected in the temperature ranges where the most intense dissipative losses appear on the spectrum of internal friction. Based on phenomenological model representations of a standard linear solid, the physical–mechanical (shear modulus defect, temperature position of local regions of inelasticity) and physical–chemical (activation energy, discrete relaxation time, intensities of detected dissipative processes) characteristics of each local dissipative process were calculated. It was found that the intensities of dissipative processes remain virtually unchanged for both annealed and non-annealed samples. The maximum variation in the shear modulus defect is 0.06%. Additionally, according to computational data, small changes are also characteristic of the following parameters: the activation energy varies from 0.5 to 1.4 kJ/mol and the relaxation time changes from 0.002 to 0.007 s, depending on the presence or absence of annealing. As a result of annealing, there is a significant increase in the relaxation microinheterogenity of the polymer system across the entire temperature range (250% for the low-temperature region and 115% for the high-temperature region).

Schlagwörter

Stichwörter der Autor:innen

dissipation mechanismsinternal friction spectralocal dissipative processespolyoxymethylenerelaxation timeshear modulus defecttemperature–frequency dependencies

Autor:innen und Institutionen

  • Frumkin Institute of Physical Chemistry and Electrochemistry, Russian Academy of Sciences (IPCE RAS), Leninskiy Prospekt 31, 119071 Moscow, Russia.

ORCID-Profile: Viktor A Lomovskoy, Svetlana A Shatokhina, Raisa A Alekhina, Nadezhda Yu Lomovskaya

Förderung

  • Ministry of Science and Higher Education of the Russian Federation

Zitieren

APA

Lomovskoy, V. A., Shatokhina, S. A., Alekhina, R. A., & Lomovskaya, N. Y. (2024). Temperature Areas of Local Inelasticity in Polyoxymethylene. Polymers, 16(24), 3582. https://doi.org/10.3390/polym16243582

Vancouver

Lomovskoy VA, Shatokhina SA, Alekhina RA, Lomovskaya NY. Temperature Areas of Local Inelasticity in Polyoxymethylene. Polymers. 2024;16(24):3582. doi:10.3390/polym16243582

BibTeX
@article{Lomovskoy2024,
  author = {Lomovskoy, Viktor A and Shatokhina, Svetlana A and Alekhina, Raisa A and Lomovskaya, Nadezhda Yu},
  title = {Temperature Areas of Local Inelasticity in Polyoxymethylene},
  journal = {Polymers},
  year = {2024},
  volume = {16},
  number = {24},
  pages = {3582},
  doi = {10.3390/polym16243582}
}
Kostenlos starten →