EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Interface Engineering of Styrenic Polymer Grafted Porous Micro-Silicon/Polyaniline Composite for Enhanced Lithium Storage Anode Materials

Yechan Lee iD, Mahesh Naikwade, Sang-Wha Lee iD

Polymers · 19.12.2024 · 16 (24) · 3544

DOI: 10.3390/polym16243544 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 19.12.2024. Verfasst von Yechan Lee und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemical and Biological Engineering, Gachon University, 1342 Seongnamdaero, Sujeong-Gu, Seongnam-Si 13120, Gyeonggi-do, Republic of Kor…. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 78 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Korea Basic Institute (National Research Facilities and Equipment Center), National Research Foundation of Korea, Basic Science Research Program through the National Research Foundation of Korea (NRF).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Si anode materials are promising candidates for next-generation Li-ion batteries (LIBs) because of their high capacities. However, expansion and low conductivity result in rapid performance degradation. Herein, we present a facile one-pot method for pyrolyzing polystyrene sulfonate (PSS) polymers at low temperatures (≤400 °C) to form a thin carbonaceous layer on the silicon surface. Specifically, micron silicon (mSi) was transformed into porous mSi (por-mSi) by a metal-assisted chemical etching method, and a phenyl-based thin film derived from the thermolysis of PSS formed a strong Si–C/Si–O–C covalent bonding with the Si surface, which helped maintain stable cycle performance by improving the interfacial properties of mSi. Additionally, PSS-grafted por-mSi (por-mSi@PSS) anode was coated with polyaniline (PANI) for endowing additional electrical conductivity. The por-mSi@PSS/PANI anode demonstrated a high reversible capacity of ~1500 mAh g−1 at 0.1 A g−1 after 100 cycles, outperforming or matching the performance reported in recent studies. A thin double layer composed of phenyl moieties and a conductive PANI coating improved the stability of Si-based anodes and provided an effective pathway for Li+ ion transport to the Si interface, suggesting that polymer-modified Si anodes hold significant promise for advanced LIB applications.

Schlagwörter

Stichwörter der Autor:innen

Li-ion batterylow-temperature thermolytic graftingmicro-sized Si

Autor:innen und Institutionen

  • Department of Chemical and Biological Engineering, Gachon University, 1342 Seongnamdaero, Sujeong-Gu, Seongnam-Si 13120, Gyeonggi-do, Republic of Korea.

ORCID-Profile: Yechan Lee, Sang-Wha Lee

Förderung

  • Korea Basic Institute (National Research Facilities and Equipment Center)
  • National Research Foundation of Korea
  • Basic Science Research Program through the National Research Foundation of Korea (NRF)
  • Gachon University Research Fund

Zitieren

APA

Lee, Y., Naikwade, M., & Lee, S. W. (2024). Interface Engineering of Styrenic Polymer Grafted Porous Micro-Silicon/Polyaniline Composite for Enhanced Lithium Storage Anode Materials. Polymers, 16(24), 3544. https://doi.org/10.3390/polym16243544

Vancouver

Lee Y, Naikwade M, Lee SW. Interface Engineering of Styrenic Polymer Grafted Porous Micro-Silicon/Polyaniline Composite for Enhanced Lithium Storage Anode Materials. Polymers. 2024;16(24):3544. doi:10.3390/polym16243544

BibTeX
@article{Lee2024,
  author = {Lee, Yechan and Naikwade, Mahesh and Lee, Sang-Wha},
  title = {Interface Engineering of Styrenic Polymer Grafted Porous Micro-Silicon/Polyaniline Composite for Enhanced Lithium Storage Anode Materials},
  journal = {Polymers},
  year = {2024},
  volume = {16},
  number = {24},
  pages = {3544},
  doi = {10.3390/polym16243544}
}
Kostenlos starten →