Inkjet-Printed Graphene–PEDOT:PSS Decorated with Sparked ZnO Nanoparticles for Application in Acetone Detection at Room Temperature
Polymers · 18.12.2024 · 16 (24) · 3521
DOI: 10.3390/polym16243521 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 18.12.2024. Verfasst von Ananya Thaibunnak und 2 weiteren Autor:innen. Beteiligte Einrichtung: Division of Printing Technology, Faculty of Science and Technology, Rajamangala University of Technology Krungthep, 2 Nanglinchi Road, Thungmahamek, …. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 69 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Research and Development Institute, Rajamangala University of Technology Krungthep, Thailand.
Abstract (Originalsprache)
This work presents a simple process for the development of flexible acetone gas sensors based on zinc oxide/graphene/poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate). The gas sensors were prepared by inkjet printing, which was followed by a metal sparking process involving different sparking times. The successful decoration of ZnO nanoparticles (average size ~19.0 nm) on the surface of the graphene–PEDOT:PSS hybrid ink was determined by characterizations, including Raman spectroscopy, Fourier transform infrared spectroscopy, field-emission transmission electron microscopy, X-ray photoelectron spectroscopy, and X-ray diffractometry. The ZnO nanoparticle-decorated graphene–PEDOT:PSS with a sparking time of 2 min exhibited the highest response of 71.9% at 10 ppm of acetone, above those of samples treated with other sparking times and the undecorated control. In addition, the optimal sensor revealed high selectivity for acetone over several other kinds of gases, such as ammonia, toluene, dimethylformamide, ethanol, methanol, and benzene, at room temperature. The gas sensor also revealed a low limit of detection (0.4 ppm), high sensitivity (6.18 ppm−1), and high stability (5-week long-term) to acetone. The response and recovery times of the sensor were found to be 4.6 min and 4.2 min, respectively. The acetone-sensing mechanism was attributed to the formation of p-n heterojunctions, which were responsible for the significantly enhanced sensitivity.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Division of Printing Technology, Faculty of Science and Technology, Rajamangala University of Technology Krungthep, 2 Nanglinchi Road, Thungmahamek, Sathorn, Bangkok 10120, Thailand.
- Division of Physics, Faculty of Science and Technology, Rajamangala University of Technology Krungthep, 2 Nanglinchi Road, Thungmahamek, Sathorn, Bangkok 10120, Thailand.
ORCID-Profile: Udomdej Pakdee
Förderung
- Research and Development Institute, Rajamangala University of Technology Krungthep, Thailand
Zitieren
APA
Thaibunnak, A., Rungruang, S., & Pakdee, U. (2024). Inkjet-Printed Graphene–PEDOT:PSS Decorated with Sparked ZnO Nanoparticles for Application in Acetone Detection at Room Temperature. Polymers, 16(24), 3521. https://doi.org/10.3390/polym16243521
Vancouver
Thaibunnak A, Rungruang S, Pakdee U. Inkjet-Printed Graphene–PEDOT:PSS Decorated with Sparked ZnO Nanoparticles for Application in Acetone Detection at Room Temperature. Polymers. 2024;16(24):3521. doi:10.3390/polym16243521
BibTeX
@article{Thaibunnak2024,
author = {Thaibunnak, Ananya and Rungruang, Suvanna and Pakdee, Udomdej},
title = {Inkjet-Printed Graphene–PEDOT:PSS Decorated with Sparked ZnO Nanoparticles for Application in Acetone Detection at Room Temperature},
journal = {Polymers},
year = {2024},
volume = {16},
number = {24},
pages = {3521},
doi = {10.3390/polym16243521}
}
EUVIMED