Acid-Hydrolysis-Assisted Cellulose Nanocrystal Isolation from Acacia mearnsii de Wild. Wood Kraft Pulp
Polymers · 29.11.2024 · 16 (23) · 3371
DOI: 10.3390/polym16233371 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 29.11.2024. Verfasst von Daniel Tavares de Farias und 7 weiteren Autor:innen. Beteiligte Einrichtung: Laboratório de Química da Madeira (LAQUIM), Forest Science Department, Universidade Federal de Santa Maria-UFSM, Av. Roraima 1000, Santa Maria 97105-…. Die Arbeit wurde bisher 26-mal zitiert (Crossref) und nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Coordination for the Improvement of Higher Education Personnel - Brazil (CAPES), Coordination for the Improvement of Higher Education Personnel—Brazil (CAPES).
Abstract (Originalsprache)
Cellulose nanocrystals (CNC) receive great attention for their physical and optical properties, high surface area, high tensile strength, rigidity (Young’s modulus up to 140 GPa), and ease of surface modification. However, controlling the properties of CNC is still challenging, given the wide variety of pulp sources and the complexity of finding suitable processing conditions. In the present study, acid hydrolysis efficiently isolated CNC from wood Acacia mearnsii brown kraft pulp (AMKP). Initially, the AMKP was delignified by the treatment with acidified sodium chlorite. The Acacia mearnsii kraft pulp obtained was then subjected to acid hydrolysis with sulfuric acid at concentrations of 50 to 58% 45 °C for 60 min. The hydrolysate was sonicated in an ultrasonic processor for 30 min. The chemical composition was determined by Fourier transform infrared spectroscopy (FTIR), crystallinity by X-ray diffraction (XRD), zeta potential by Zetasizer ZS equipment, thermal stability by thermogravimetric analysis (TGA), and morphology by transmission electron microscopy (TEM) to verify the effect of acid concentration on the yield and properties of CNC. The optimization of the isolation process demonstrated that the maximum yield of 41.95% can be obtained when AMWP was hydrolyzed with sulfuric acid at a concentration of 54%. It was possible to isolate CNC with a crystallinity index between 71.66% and 81.76%, with the onset of thermal degradation at 240 °C; zeta potential of −47.87 to 57.23 mV; and rod-like morphology, with lengths and widths between 181.70 nm and 260.24 nm and 10.36 nm and 11.06 nm, respectively. Sulfuric acid concentration significantly affected the yield of acid hydrolysis, allowing the isolation of CNC with variable dimensions, high thermal stability, high crystallinity index, and great colloidal stability in aqueous medium.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Laboratório de Química da Madeira (LAQUIM), Forest Science Department, Universidade Federal de Santa Maria-UFSM, Av. Roraima 1000, Santa Maria 97105-900, RS, Brazil.
- Chemical and Environmental Engineering Department, University of the Basque Country UPV/EHU, Plaza Europa, 1, Donostia-San Sebastián 20018, Guipuzcoa, Spain.
- Postgraduate Program in Materials Science and Engineering, Federal University of Pelotas, Pelotas 96010-610, RS, Brazil.
- Department of Forestry Engineering and Technology (UFPR), Universidade Federal do Paraná-UFPR, Av. Prefeito Lothário Meissner, 632-Jardim Botânico, Curitiba 80210-170, PR, Brazil.
- Programa de Pós-Graduação em Ciências Farmacêuticas, University of Santa Maria-UFSM, Av. Roraima 1000, Santa Maria 97105-900, RS, Brazil.
ORCID-Profile: Daniel Tavares de Farias, Jalel Labidi, Pedro Henrique Gonzalez de Cademartori, Carline Andréa Welter, Gabriela Teixeira da Silva, Tielle Moraes de Almeida
Förderung
- Coordination for the Improvement of Higher Education Personnel - Brazil (CAPES)
- Coordination for the Improvement of Higher Education Personnel—Brazil (CAPES)
Zitieren
APA
de Farias, D. T., Labidi, J., Pedrazzi, C., Gatto, D. A., de Cademartori, P. H. G., Welter, C. A., da Silva, G. T., & de Almeida, T. M. (2024). Acid-Hydrolysis-Assisted Cellulose Nanocrystal Isolation from Acacia mearnsii de Wild. Wood Kraft Pulp. Polymers, 16(23), 3371. https://doi.org/10.3390/polym16233371
Vancouver
de Farias DT, Labidi J, Pedrazzi C, Gatto DA, de Cademartori PHG, Welter CA, et al. Acid-Hydrolysis-Assisted Cellulose Nanocrystal Isolation from Acacia mearnsii de Wild. Wood Kraft Pulp. Polymers. 2024;16(23):3371. doi:10.3390/polym16233371
BibTeX
@article{deFarias2024,
author = {de Farias, Daniel Tavares and Labidi, Jalel and Pedrazzi, Cristiane and Gatto, Darci Alberto and de Cademartori, Pedro Henrique Gonzalez and Welter, Carline Andréa and da Silva, Gabriela Teixeira and de Almeida, Tielle Moraes},
title = {Acid-Hydrolysis-Assisted Cellulose Nanocrystal Isolation from Acacia mearnsii de Wild. Wood Kraft Pulp},
journal = {Polymers},
year = {2024},
volume = {16},
number = {23},
pages = {3371},
doi = {10.3390/polym16233371}
}
EUVIMED