EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Life Cycle Assessment (LCA) of Bioplastics Production from Lignocellulosic Waste (Study Case: PLA and PHB)

Lacrimioara Senila iD, Eniko Kovacs iD, Maria-Alexandra Resz, Marin Senila iD, Anca Becze, Cecilia Roman

Polymers · 27.11.2024 · 16 (23) · 3330

DOI: 10.3390/polym16233330 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 27.11.2024. Verfasst von Lacrimioara Senila und 5 weiteren Autor:innen. Beteiligte Einrichtung: Research Institute for Analytical Instrumentation Subsidiary, National Institute for Research and Development of Optoelectronics Bucharest INOE 2000,…. Die Arbeit wurde bisher 82-mal zitiert (Crossref) und nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministerul Cercetarii si Inovarii, Core Program within the National Research Development and Innovation Plan 2022–2027, with the support of MCID.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Life cycle assessment of a technology is the key to technological development in the context of sustainable development. Orchard waste has been identified as a potential source of bioplastics. The objective of this study was to conduct a life cycle assessment of two specific bioplastic materials, namely, L-polylactic acid (PLA) and poly(3-hydroxybutyrate) (PHB). Bioplastics, such as PLA acid and PHB, can be used as alternatives to conventional plastics due to their biodegradability and non-toxicity, both of which have the potential to replace conventional petroleum-based plastics. Polylactic acid was synthesized from orchard waste in a series of stages, including biomass processing, pretreatment for carbohydrate extraction, simultaneous saccharification and fermentation (SSF), and microwave polymerization. PHB, another biodegradable polymer, is produced by microorganisms through the fermentation of sugars obtained from the same biomass. Applied LCAs show that for PLA production, the stages having the greatest environmental impact are biomass processing, pretreatment, and the SSF process, and for PHB production, very energy-intensive stages significantly contributing to the environmental impacts are biomass processing and pretreatment stages. For both PLA and PHB, the initial stages of biomass processing and pretreatment are the most energy-intensive and significant contributors to CO2 emissions.

Schlagwörter

Stichwörter der Autor:innen

L-polylactic acidbioplasticslife cycle assessmentorchard wastepoly(3-hydroxybutyrate)

Autor:innen und Institutionen

  • Research Institute for Analytical Instrumentation Subsidiary, National Institute for Research and Development of Optoelectronics Bucharest INOE 2000, 67 Donath Street, 400293 Cluj-Napoca, Romania.
  • Research Institute for Organic Auxiliary Products, 551022 Medias, Romania.

ORCID-Profile: Lacrimioara Senila, Eniko Kovacs, Marin Senila

Förderung

  • Ministerul Cercetarii si Inovarii
  • Core Program within the National Research Development and Innovation Plan 2022–2027, with the support of MCID

Zitieren

APA

Senila, L., Kovacs, E., Resz, M. A., Senila, M., Becze, A., & Roman, C. (2024). Life Cycle Assessment (LCA) of Bioplastics Production from Lignocellulosic Waste (Study Case: PLA and PHB). Polymers, 16(23), 3330. https://doi.org/10.3390/polym16233330

Vancouver

Senila L, Kovacs E, Resz MA, Senila M, Becze A, Roman C. Life Cycle Assessment (LCA) of Bioplastics Production from Lignocellulosic Waste (Study Case: PLA and PHB). Polymers. 2024;16(23):3330. doi:10.3390/polym16233330

BibTeX
@article{Senila2024,
  author = {Senila, Lacrimioara and Kovacs, Eniko and Resz, Maria-Alexandra and Senila, Marin and Becze, Anca and Roman, Cecilia},
  title = {Life Cycle Assessment (LCA) of Bioplastics Production from Lignocellulosic Waste (Study Case: PLA and PHB)},
  journal = {Polymers},
  year = {2024},
  volume = {16},
  number = {23},
  pages = {3330},
  doi = {10.3390/polym16233330}
}
Kostenlos starten →