EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Fabrication of Oil-Absorbing Porous Sponges via 3D Electrospinning of Recycled Expanded Polystyrene with Functional Additive

Taegyun Kim iD, Seung Min Kang, Kanghyun Kim, Geon Hwee Kim iD

Polymers · 27.11.2024 · 16 (23) · 3322

DOI: 10.3390/polym16233322 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 27.11.2024. Verfasst von Taegyun Kim und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, Chungbuk National University (CBNU), 1 Chungdae-ro, Seowon-gu, Cheongju-si 28644, Republic of Korea. Die Arbeit wurde bisher 17-mal zitiert (Crossref) und nennt 57 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Research Foundation of Korea (NRF), Chungbuk National University BK21 program (2021), National Research Foundation of Korea (NRF) with a grant funded by the Korean government (MSIT).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, a three-dimensional (3D) porous sponge capable of oil–water separation was fabricated using recycled expanded polystyrene (EPS) through 3D electrospinning, by adding phosphoric acid to the electrospinning solution. The fabrication process was a rapid and efficient single-step process to produce the 3D sponge. In addition, the additive’s concentration was also optimized for oil absorption. The fabricated EPS sponge was highly effective in oil–water separation due to its excellent hydrophobic and oleophilic properties. This demonstrates its potential as a sustainable and efficient absorbent to address ongoing oil pollution issues. Moreover, the performance of the recycled EPS sponge was found to be comparable to that of sponges made from virgin polystyrene, suggesting the feasibility of using recycled materials for the production of high-value products. This research presents an efficient method for fabricating 3D sponges from recycled materials, contributing to environmental protection and resource recycling.

Schlagwörter

Stichwörter der Autor:innen

expanded polystyrene (EPS)hydrophobicoil–water separationoleophilicrecyclingthree-dimensional electrospinning

Autor:innen und Institutionen

  • Department of Mechanical Engineering, Chungbuk National University (CBNU), 1 Chungdae-ro, Seowon-gu, Cheongju-si 28644, Republic of Korea.
  • Department of Mechanical Engineering, Pohang University of Science and Technology (POSTECH), 77 Cheongam-Ro, Nam-Gu, Pohang 37673, Republic of Korea.

ORCID-Profile: Taegyun Kim, Geon Hwee Kim

Förderung

  • National Research Foundation of Korea (NRF)
  • Chungbuk National University BK21 program (2021)
  • National Research Foundation of Korea (NRF) with a grant funded by the Korean government (MSIT)

Zitieren

APA

Kim, T., Kang, S. M., Kim, K., & Kim, G. H. (2024). Fabrication of Oil-Absorbing Porous Sponges via 3D Electrospinning of Recycled Expanded Polystyrene with Functional Additive. Polymers, 16(23), 3322. https://doi.org/10.3390/polym16233322

Vancouver

Kim T, Kang SM, Kim K, Kim GH. Fabrication of Oil-Absorbing Porous Sponges via 3D Electrospinning of Recycled Expanded Polystyrene with Functional Additive. Polymers. 2024;16(23):3322. doi:10.3390/polym16233322

BibTeX
@article{Kim2024,
  author = {Kim, Taegyun and Kang, Seung Min and Kim, Kanghyun and Kim, Geon Hwee},
  title = {Fabrication of Oil-Absorbing Porous Sponges via 3D Electrospinning of Recycled Expanded Polystyrene with Functional Additive},
  journal = {Polymers},
  year = {2024},
  volume = {16},
  number = {23},
  pages = {3322},
  doi = {10.3390/polym16233322}
}
Kostenlos starten →