Performance Optimization Approach of Polymer-Modified Asphalt Mixtures with PET and PE Waste
Polymers · 27.11.2024 · 16 (23) · 3308
DOI: 10.3390/polym16233308 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 27.11.2024. Verfasst von Assel Jexembayeva und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Industrial and Civil Construction Technology, Eurasian National University, Astana 010000, Kazakhstan. Die Arbeit wurde bisher 21-mal zitiert (Crossref) und nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Committee of Science of the Ministry of Science and Higher Education of the Republic of Kazakh-stan "Establishment of a construction and technical engineering…, Committee of Science of the Ministry of Science and Higher Education of the Republic of Kazakhstan.
Abstract (Originalsprache)
Road infrastructure sustainability and pavement performance may be increased by using waste materials like polyethylene terephthalate (PET) and polyethylene waste (PE waste) in polymer-modified asphalt mixtures. As seen by a more pronounced rise in the softening point, which exceeds 110 °C with 8% PE waste, PET was found to improve the tensile strength, resistance to cracking, and thermal stability of asphalt mixes. PE waste also increases ductility up to 4% PE waste, beyond which the combination becomes more brittle, and dramatically decreases penetration, strengthening the asphalt’s resistance to deformation. Additionally, bitumen treated with PE waste is more workable than asphalt without PET, even though bitumen treated with PE waste had a viscosity of up to 4500 Pa. Complex shear modules decreased as the PE waste and PET content increased. PET, on the other hand, increases the binder’s overall stiffness, elasticity, and tensile strength. Nevertheless, when PET content rises, ductility steadily decreases. Previous studies concentrated on the effects of each component separately, and this paper fills this knowledge gap by investigating the combined effects of PET and PE waste. The results indicate that the highest compressive strength (7.5 MPa) was obtained with 6% PE + 2% PET, while the highest tensile strength (1.40 MPa) was achieved with a balanced mix of 4% PE waste + 4% PET. Additionally, the viscosity of asphalt is increased by PET and PE waste, enhancing its performance at high temperatures. These findings demonstrate how combining PET and PE waste improves the mechanical and thermal characteristics of asphalt, providing a balance between stiffness and flexibility, a crucial feature for durable road materials under a variety of circumstances.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Industrial and Civil Construction Technology, Eurasian National University, Astana 010000, Kazakhstan.
- ENU Lab, Eurasian National University, Astana 010000, Kazakhstan.
Förderung
- Committee of Science of the Ministry of Science and Higher Education of the Republic of Kazakh-stan "Establishment of a construction and technical engineering…
- Committee of Science of the Ministry of Science and Higher Education of the Republic of Kazakhstan
Zitieren
APA
Jexembayeva, A., Konkanov, M., Aruova, L., Kirgizbayev, A., & Zhaksylykova, L. (2024). Performance Optimization Approach of Polymer-Modified Asphalt Mixtures with PET and PE Waste. Polymers, 16(23), 3308. https://doi.org/10.3390/polym16233308
Vancouver
Jexembayeva A, Konkanov M, Aruova L, Kirgizbayev A, Zhaksylykova L. Performance Optimization Approach of Polymer-Modified Asphalt Mixtures with PET and PE Waste. Polymers. 2024;16(23):3308. doi:10.3390/polym16233308
BibTeX
@article{Jexembayeva2024,
author = {Jexembayeva, Assel and Konkanov, Marat and Aruova, Lyazat and Kirgizbayev, Akpan and Zhaksylykova, Lailya},
title = {Performance Optimization Approach of Polymer-Modified Asphalt Mixtures with PET and PE Waste},
journal = {Polymers},
year = {2024},
volume = {16},
number = {23},
pages = {3308},
doi = {10.3390/polym16233308}
}
EUVIMED