Electrospinning and Rheological Characterization of Polyethylene Terephthalate and Polyvinyl Alcohol with Different Degrees of Hydrolysis Incorporating Molecularly Imprinted Polymers
Polymers · 26.11.2024 · 16 (23) · 3297
DOI: 10.3390/polym16233297 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 26.11.2024. Verfasst von Sisonke Sigonya und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemistry, Durban University of Technology, P.O Box 1334, Durban 4000, South Africa. Die Arbeit wurde bisher 19-mal zitiert (Crossref) und nennt 61 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National research fund, National research Foundation (NRF).
Abstract (Originalsprache)
This study investigates the electrospinning and rheological properties of polyethylene terephthalate (PET) and polyvinyl alcohol (PVA) with varying degrees of hydrolysis (DH) for molecularly imprinted polymer (MIP) incorporation. The morphology and properties of the electrospun nanofibers were evaluated, revealing that PVA nanofibers exhibited smoother and more uniform structures compared to PET fibers. The rheological behavior of the polymer solutions was also characterized, showing that PVA 99 DH solution exhibited shear-thinning behavior due to the unique structural properties of the polymer chains. The introduction of MIP and NIP additives had no significant impact on the rheological properties, except for PVA 99 MIP and NIP solutions, which showed deviations from Newtonian behavior. The electrospun MIP nanofibers showed a conductivity of 1054 µS/cm for PVA (87–90% DH) and a viscosity of 165.5 mPa·s, leading to optimal fiber formation, while displaying a good adsorption capacity of 0.36 mg for PVA-MIP to effectively target pharmaceuticals such as emtricitabine and tenofovir disoproxil, showing their potential for advanced water treatment applications. The results suggest that the electrospinning process and rheological properties of the polymer solutions are influenced by the molecular structure and interactions within the polymer matrix, which can be exploited to tailor the properties of MIPs for specific applications.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Chemistry, Durban University of Technology, P.O Box 1334, Durban 4000, South Africa.
- DST/Mintek NIC, Advanced Materials Division, Mintek, 200 Malibongwe Drive, Randburg 2194, South Africa.
- Department of Chemistry and Biomolecular Sciences, University of Ottawa, 150 Louis-Pasteur Pvt, Ottawa, ON K1N 6N5, Canada.
ORCID-Profile: Sisonke Sigonya, Teboho Clement Mokhena, Talent Raymond Makhanya, Thabang Hendrica Mokhothu
Förderung
- National research fund
- National research Foundation (NRF)
Zitieren
APA
Sigonya, S., Mokhena, T. C., Mayer, P., Makhanya, T. R., & Mokhothu, T. H. (2024). Electrospinning and Rheological Characterization of Polyethylene Terephthalate and Polyvinyl Alcohol with Different Degrees of Hydrolysis Incorporating Molecularly Imprinted Polymers. Polymers, 16(23), 3297. https://doi.org/10.3390/polym16233297
Vancouver
Sigonya S, Mokhena TC, Mayer P, Makhanya TR, Mokhothu TH. Electrospinning and Rheological Characterization of Polyethylene Terephthalate and Polyvinyl Alcohol with Different Degrees of Hydrolysis Incorporating Molecularly Imprinted Polymers. Polymers. 2024;16(23):3297. doi:10.3390/polym16233297
BibTeX
@article{Sigonya2024,
author = {Sigonya, Sisonke and Mokhena, Teboho Clement and Mayer, Paul and Makhanya, Talent Raymond and Mokhothu, Thabang Hendrica},
title = {Electrospinning and Rheological Characterization of Polyethylene Terephthalate and Polyvinyl Alcohol with Different Degrees of Hydrolysis Incorporating Molecularly Imprinted Polymers},
journal = {Polymers},
year = {2024},
volume = {16},
number = {23},
pages = {3297},
doi = {10.3390/polym16233297}
}
EUVIMED