Optimizing Mechanical Properties of Recycled 3D-Printed PLA Parts for Sustainable Packaging Solutions Using Experimental Analysis and Machine Learning
Polymers · 24.11.2024 · 16 (23) · 3268
DOI: 10.3390/polym16233268 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 24.11.2024. Verfasst von Maria Tănase und 6 weiteren Autor:innen. Beteiligte Einrichtung: Mechanical Engineering Department, Petroleum-Gas University of Ploiești, 100680 Ploiesti, Romania. Die Arbeit wurde bisher 50-mal zitiert (Crossref) und nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Increasing environmental concerns and the need for sustainable materials have driven a focus towards the utilization of recycled polylactic acid (PLA) in additive manufacturing as PLA offers advantages over other thermoplastics, including biodegradability, ease of processing, and a lower environmental impact during production. This study explores the optimization of the mechanical properties of recycled PLA parts through a combination of experimental and machine learning approaches. A series of experiments were conducted to investigate the impact of various processing parameters, such as layer thickness and infill density, as well as annealing conditions, on the mechanical properties of recycled PLA parts. Machine learning algorithms have proven the possibility to predict tensile behavior with an average error of 6.059%. The results demonstrate that specific combinations of processing parameters and post-treatment annealing differently improve the mechanical properties (with 7.31% in ultimate tensile strength (UTS), 0.28% in Young’s modulus, and 3.68% in elongation) and crystallinity (with 22.33%) of recycled PLA according to XRD analysis, making it a viable alternative to virgin PLA in various applications such as sustainable packaging solutions, including biodegradable containers, clamshell packaging, and protective inserts. The optimized recycled PLA parts exhibited mechanical properties and crystallinity levels comparable to those of their virgin counterparts, highlighting their potential for reducing environmental impact and saving costs. For both as-built and annealed samples, the optimal settings for achieving high composite desirability involved a 0.2 mm layer thickness, with 75% infill for the as-built samples and 100% infill for the annealed samples. This study provides a comprehensive framework for optimizing recycled PLA in additive manufacturing, contributing to the advancement of sustainable material engineering and the circular economy.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Mechanical Engineering Department, Petroleum-Gas University of Ploiești, 100680 Ploiesti, Romania.
- Petroleum Geology and Reservoir Engineering Department, Petroleum-Gas University of Ploiești, 100680 Ploiesti, Romania.
- Automation, Computers and Electronics Department, Petroleum-Gas University of Ploiești, 100680 Ploiesti, Romania.
- Chemistry Department, Petroleum-Gas University of Ploiești, 100680 Ploiesti, Romania.
ORCID-Profile: Maria Tănase, Alexandra Ileana Portoacă, Alin Diniță, Gheorghe Brănoiu, Florin Zamfir
Zitieren
APA
Tănase, M., Portoacă, A. I., Diniță, A., Brănoiu, G., Zamfir, F., Sirbu, E. E., & Călin, C. (2024). Optimizing Mechanical Properties of Recycled 3D-Printed PLA Parts for Sustainable Packaging Solutions Using Experimental Analysis and Machine Learning. Polymers, 16(23), 3268. https://doi.org/10.3390/polym16233268
Vancouver
Tănase M, Portoacă AI, Diniță A, Brănoiu G, Zamfir F, Sirbu EE, et al. Optimizing Mechanical Properties of Recycled 3D-Printed PLA Parts for Sustainable Packaging Solutions Using Experimental Analysis and Machine Learning. Polymers. 2024;16(23):3268. doi:10.3390/polym16233268
BibTeX
@article{Tnase2024,
author = {Tănase, Maria and Portoacă, Alexandra Ileana and Diniță, Alin and Brănoiu, Gheorghe and Zamfir, Florin and Sirbu, Elena-Emilia and Călin, Cătălina},
title = {Optimizing Mechanical Properties of Recycled 3D-Printed PLA Parts for Sustainable Packaging Solutions Using Experimental Analysis and Machine Learning},
journal = {Polymers},
year = {2024},
volume = {16},
number = {23},
pages = {3268},
doi = {10.3390/polym16233268}
}
EUVIMED