EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Synthesis and Evaluation of Polyurethane as Waterproof Adhesion Layer for Steel Bridge Deck

Yan Chen iD, Jianying Hu, Xiaonan Wu, Shaochan Duan, Hongyu Wang, Tao Ma iD

Polymers · 11.11.2024 · 16 (22) · 3140

DOI: 10.3390/polym16223140 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 11.11.2024. Verfasst von Yan Chen und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Transportation, Southeast University, Southeast University Road #2, Nanjing 211189, China. Die Arbeit wurde bisher 15-mal zitiert (Crossref) und nennt 56 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Science Foundation of Jiangsu Province, National Natural Science Foundation of 388 China, Distinguished Young Scholars Shuangchuang Program of 390 Jiangsu Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Service life of traditional steel bridge deck pavement is significantly shortened due to the failure of waterproof adhesion. To improve the interlayer bonding performance and extend its service life, polyurethane is proposed as a waterproof adhesion layer (WAL) for a steel bridge deck. This study aims to synthesize polyurethane WAL by free radical solution polymerization under different types and dosages of crosslinking agents as well as the mixing ratio of an acrylic co-blend. Tensile properties, water resistance, glass transition temperatures, thermal stability, and adhesive strength of the polyurethane binder are evaluated. The results demonstrate that polyurethane WAL yields desirable performance by using a hydroxyl molar ratio of 1/3 and an acrylic co-blend of 65%. Specifically, the tensile strength and breaking elongation of polyurethane WAL reach the maximum values of 6.466 MPa and 268.4%, respectively. The water absorption rate of polyurethane WAL is less than 4%. Glass transition temperatures of polyurethane WAL are between −80 °C and 60 °C, respectively. Polyurethane WAL features remarkable high- and low-temperature performance and thermal stability. Finally, adhesion strength between polyurethane WAL and the steel plate reaches up to 5.21 MPa. The outcome of this study facilitates the design and application of polyurethane waterproofing adhesion layers for steel bridge decks.

Schlagwörter

Stichwörter der Autor:innen

acrylic co-blendcrosslinking agentperformancepolyurethane WALsteel bridge deck

Autor:innen und Institutionen

  • School of Transportation, Southeast University, Southeast University Road #2, Nanjing 211189, China.

ORCID-Profile: Yan Chen, Tao Ma

Förderung

  • Natural Science Foundation of Jiangsu Province
  • National Natural Science Foundation of 388 China
  • Distinguished Young Scholars Shuangchuang Program of 390 Jiangsu Province
  • National Natural Science Foundation of China
  • Jiangsu Funds for Distinguished Young Scholars Shuangchuang Program of Jiangsu Province

Zitieren

APA

Chen, Y., Hu, J., Wu, X., Duan, S., Wang, H., & Ma, T. (2024). Synthesis and Evaluation of Polyurethane as Waterproof Adhesion Layer for Steel Bridge Deck. Polymers, 16(22), 3140. https://doi.org/10.3390/polym16223140

Vancouver

Chen Y, Hu J, Wu X, Duan S, Wang H, Ma T. Synthesis and Evaluation of Polyurethane as Waterproof Adhesion Layer for Steel Bridge Deck. Polymers. 2024;16(22):3140. doi:10.3390/polym16223140

BibTeX
@article{Chen2024,
  author = {Chen, Yan and Hu, Jianying and Wu, Xiaonan and Duan, Shaochan and Wang, Hongyu and Ma, Tao},
  title = {Synthesis and Evaluation of Polyurethane as Waterproof Adhesion Layer for Steel Bridge Deck},
  journal = {Polymers},
  year = {2024},
  volume = {16},
  number = {22},
  pages = {3140},
  doi = {10.3390/polym16223140}
}
Kostenlos starten →