Development and Characterization of 3D-Printed PLA/Exfoliated Graphite Composites for Enhanced Electrochemical Performance in Energy Storage Applications
Polymers · 09.11.2024 · 16 (22) · 3131
DOI: 10.3390/polym16223131 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 09.11.2024. Verfasst von Ananias Lima Dos Santos und 5 weiteren Autor:innen. Beteiligte Einrichtung: GEMATA-LEEN, Department of Chemistry, University Federal of Amazonas, Manaus 69067-005, AM, Brazil. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Fundação de Amparo à Pesquisa do Estado do Amazonas, Coordenação de Aperfeicoamento de Pessoal de Nível Superior, Coordenação de Aperfeiçoamento de Pessoal de Nível Superior—Brasil (CAPES).
Abstract (Originalsprache)
This research introduces a new way to create a composite material (PLA/EG) for 3D printing. It combines polylactic acid (PLA) with exfoliated graphite (EG) using a physical mixing method, followed by direct mixing in a single-screw extruder. Structural and vibrational analyses using X-ray diffraction and Fourier transform infrared spectroscopy confirmed the PLA/EG’s formation (composite). The analysis also suggests physical adsorption as the primary interaction between the two materials. The exfoliated graphite acts as a barrier (thermal behavior), reducing heat transfer via TG. Electrochemical measurements reveal redox activity (cyclic voltammetry) with a specific capacitance of ~ 6 F g−1, low solution resistance, and negligible charge transfer resistance, indicating ion movement through a Warburg diffusion process. Additionally, in terms of complex behavior (electrochemical impedance spectroscopy), the PLA/EG’s actual capacitance C’(ω) displayed a value greater than 1000 μF cm−2, highlighting the composite’s effectiveness in storing charge. These results demonstrate that PLA/EG composites hold significant promise as electrodes in electronic devices. The methodology used in this study not only provides a practical way to create functional composites but also opens doors for new applications in electronics and energy storage.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- GEMATA-LEEN, Department of Chemistry, University Federal of Amazonas, Manaus 69067-005, AM, Brazil.
ORCID-Profile: João Carlos Martins da Costa, Daniel Araújo Gonçalves, Leandro Aparecido Pocrifka
Förderung
- Fundação de Amparo à Pesquisa do Estado do Amazonas
- Coordenação de Aperfeicoamento de Pessoal de Nível Superior
- Coordenação de Aperfeiçoamento de Pessoal de Nível Superior—Brasil (CAPES)
Zitieren
APA
Dos Santos, A. L., de Souza, F. C. R., Martins da Costa, J. C., Gonçalves, D. A., Passos, R. R., & Pocrifka, L. A. (2024). Development and Characterization of 3D-Printed PLA/Exfoliated Graphite Composites for Enhanced Electrochemical Performance in Energy Storage Applications. Polymers, 16(22), 3131. https://doi.org/10.3390/polym16223131
Vancouver
Dos Santos AL, de Souza FCR, Martins da Costa JC, Gonçalves DA, Passos RR, Pocrifka LA. Development and Characterization of 3D-Printed PLA/Exfoliated Graphite Composites for Enhanced Electrochemical Performance in Energy Storage Applications. Polymers. 2024;16(22):3131. doi:10.3390/polym16223131
BibTeX
@article{DosSantos2024,
author = {Dos Santos, Ananias Lima and de Souza, Francisco Cezar Ramos and Martins da Costa, João Carlos and Gonçalves, Daniel Araújo and Passos, Raimundo Ribeiro and Pocrifka, Leandro Aparecido},
title = {Development and Characterization of 3D-Printed PLA/Exfoliated Graphite Composites for Enhanced Electrochemical Performance in Energy Storage Applications},
journal = {Polymers},
year = {2024},
volume = {16},
number = {22},
pages = {3131},
doi = {10.3390/polym16223131}
}
EUVIMED