Evaluation of Blended Poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) Properties Containing Various 3HHx Monomers
Polymers · 31.10.2024 · 16 (21) · 3077
DOI: 10.3390/polym16213077 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 31.10.2024. Verfasst von Nara Shin und 11 weiteren Autor:innen. Beteiligte Einrichtung: Department of Biological Engineering, College of Engineering, Konkuk University, Seoul 05029, Republic of Korea. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 87 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Research Foundation of Korea, R&D Program of MOTIE/KEIT.
Abstract (Originalsprache)
Polyhydroxyalkanoate (PHA), specifically poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (P(3HB-co-3HHx), PHBHHx) with physical properties governed by the 3-hydroxyhexanoate (3HHx) mole fraction, is a promising bioplastic. Although engineered strains used to produce P(3HB-co-3HHx) with various 3HHx mole contents and fermentation techniques have been studied, mass production with specific 3HHx fractions and monomers depends on the batch, supply of substrates, and strains, resulting in the time-consuming development of strains and complex culture conditions for P(3HB-co-3HHx). To overcome these limitations, we blended poly(3-hydroxybutyrate) [(P(3HB), produced from C. necator H16] and P(3HB-co-20 mol%3HHx) [from C. necator 2668/pCB81] to prepare films with various 3HHx contents. We evaluated the molecular weight and physical, thermal, and mechanical properties of these films and confirmed the influence of the 3HHx monomer content on the mechanical and thermal properties as well as degradability of the blended P(3HB-co-3HHx) films containing various 3HHx mole fractions, similar to that of original microbial-based P(3HB-co-3HHx). Moreover, the degradation rate analyzed via Microbulbifer sp. was >76% at all blending ratios within 2 days, whereas a weaker effect of the 3HHx mole fraction of the blended polymer on degradation was observed. P(3HB-co-3HHx) could be produced via simple blending using abundantly produced P(3HB) and P(3HB-co-20 mol%HHx), and the resulting copolymer is applicable as a biodegradable plastic.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Biological Engineering, College of Engineering, Konkuk University, Seoul 05029, Republic of Korea.
- Institute for Ubiquitous Information Technology and Application, Konkuk University, Seoul 05029, Republic of Korea.
- Green & Sustainable Materials R&D Department, Research Institute of Clean Manufacturing System, Korea Institute of Industrial Technology (KITECH), Cheonan-si 31056, Republic of Korea.
- Department of Chemical Engineering, Kyung Hee University, Yongin-si 17104, Republic of Korea.
ORCID-Profile: Jong-Min Jeon, Jeong-Jun Yoon, Jeong Chan Joo
Förderung
- National Research Foundation of Korea
- R&D Program of MOTIE/KEIT
Zitieren
APA
Shin, N., Kim, S. H., Oh, J., Kim, S., Lee, Y., Shin, Y., Choi, S., Bhatia, S. K., Jeon, J. M., Yoon, J. J., Joo, J. C., & Yang, Y. H. (2024). Evaluation of Blended Poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) Properties Containing Various 3HHx Monomers. Polymers, 16(21), 3077. https://doi.org/10.3390/polym16213077
Vancouver
Shin N, Kim SH, Oh J, Kim S, Lee Y, Shin Y, et al. Evaluation of Blended Poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) Properties Containing Various 3HHx Monomers. Polymers. 2024;16(21):3077. doi:10.3390/polym16213077
BibTeX
@article{Shin2024,
author = {Shin, Nara and Kim, Su Hyun and Oh, Jinok and Kim, Suwon and Lee, Yeda and Shin, Yuni and Choi, Suhye and Bhatia, Shashi Kant and Jeon, Jong-Min and Yoon, Jeong-Jun and Joo, Jeong Chan and Yang, Yung-Hun},
title = {Evaluation of Blended Poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) Properties Containing Various 3HHx Monomers},
journal = {Polymers},
year = {2024},
volume = {16},
number = {21},
pages = {3077},
doi = {10.3390/polym16213077}
}
EUVIMED