EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Medium-Chain-Length Alkyl Silane Modified Nanocellulose in Poly(3-hydroxybutyrate) Nanocomposites

Cătălina Diana Uşurelu, Denis Mihaela Panaitescu iD, Gabriela Mădălina Oprică, Cristian-Andi Nicolae, Augusta Raluca Gabor iD, Celina Maria Damian, Raluca Ianchiş, Mircea Teodorescu iD, Adriana Nicoleta Frone iD

Polymers · 31.10.2024 · 16 (21) · 3069

DOI: 10.3390/polym16213069 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 31.10.2024. Verfasst von Cătălina Diana Uşurelu und 8 weiteren Autor:innen. Beteiligte Einrichtung: National Institute for Research & Development in Chemistry and Petrochemistry-ICECHIM, 202 Splaiul Independentei, 060021 Bucharest, Romania. Die Arbeit wurde bisher 15-mal zitiert (Crossref) und nennt 102 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Research, Innovation, and Digitization.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Poly (3-hydroxybutyrate) (PHB) is a valuable biopolymer that is produced in industrial quantity but is not widely used in applications due to some drawbacks. The addition of cellulose nanofibers (CNF) as a biofiller in PHB/CNF nanocomposites may improve PHB properties and enlarge its application field. In this work, n-octyltriethoxy silane (OTES), a medium-chain-length alkyl silane, was used to surface chemically modify the CNF (CNF_OTES) to enhance their hydrophobicity and improve their compatibility with PHB. The surface functionalization of CNF and nanodimension were emphasized by Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, thermogravimetric analysis, atomic force microscopy, dynamic light scattering, and water contact angle (CA). Surface modification of CNF with OTES led to an increase in thermal stability by 25 °C and more than the doubling of CA. As a result of the higher surface hydrophobicity, the CNF_OTES were more homogeneously dispersed in PHB than unmodified CNF, leading to a PHB nanocomposite with better thermal and mechanical properties. Thus, an increase by 122% of the storage modulus at 25 °C, a slight increase in crystallinity, a better melting processability, and good thermal stability were obtained after reinforcing PHB with CNF_OTES, paving the way for increasing PHB applicability.

Schlagwörter

Stichwörter der Autor:innen

AFMalkyl silanecellulose nanofibersnanodimensionpolyhydroxyalkanoates

Autor:innen und Institutionen

  • National Institute for Research & Development in Chemistry and Petrochemistry-ICECHIM, 202 Splaiul Independentei, 060021 Bucharest, Romania.
  • Faculty of Chemical Engineering and Biotechnology, National University of Science and Technology Politehnica, 011061 Bucharest, Romania.

ORCID-Profile: Denis Mihaela Panaitescu, Augusta Raluca Gabor, Mircea Teodorescu, Adriana Nicoleta Frone

Förderung

  • Ministry of Research, Innovation, and Digitization

Zitieren

APA

Uşurelu, C. D., Panaitescu, D. M., Oprică, G. M., Nicolae, C. A., Gabor, A. R., Damian, C. M., Ianchiş, R., Teodorescu, M., & Frone, A. N. (2024). Effect of Medium-Chain-Length Alkyl Silane Modified Nanocellulose in Poly(3-hydroxybutyrate) Nanocomposites. Polymers, 16(21), 3069. https://doi.org/10.3390/polym16213069

Vancouver

Uşurelu CD, Panaitescu DM, Oprică GM, Nicolae CA, Gabor AR, Damian CM, et al. Effect of Medium-Chain-Length Alkyl Silane Modified Nanocellulose in Poly(3-hydroxybutyrate) Nanocomposites. Polymers. 2024;16(21):3069. doi:10.3390/polym16213069

BibTeX
@article{Uurelu2024,
  author = {Uşurelu, Cătălina Diana and Panaitescu, Denis Mihaela and Oprică, Gabriela Mădălina and Nicolae, Cristian-Andi and Gabor, Augusta Raluca and Damian, Celina Maria and Ianchiş, Raluca and Teodorescu, Mircea and Frone, Adriana Nicoleta},
  title = {Effect of Medium-Chain-Length Alkyl Silane Modified Nanocellulose in Poly(3-hydroxybutyrate) Nanocomposites},
  journal = {Polymers},
  year = {2024},
  volume = {16},
  number = {21},
  pages = {3069},
  doi = {10.3390/polym16213069}
}
Kostenlos starten →