Bio-Based and Biodegradable Polymeric Materials for a Circular Economy
Polymers · 28.10.2024 · 16 (21) · 3015
DOI: 10.3390/polym16213015 ↗Kurz gefasst
Übersichtsarbeit in der Zeitschrift Polymers, online erschienen am 28.10.2024. Verfasst von Víctor Oliver-Cuenca und 13 weiteren Autor:innen. Beteiligte Einrichtung: Instituto de Ciencia y Tecnología de Polímeros, ICTP-CSIC, Calle Juan de la Cierva 3, 28006 Madrid, Spain. Die Arbeit wurde bisher 111-mal zitiert (Crossref) und nennt 581 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Agencia Estatal de Investigación, Fondo Europeo de Desarrollo Regional (FEDER, EU), NextGenerationEU MRR.
Abstract (Originalsprache)
Nowadays, plastic contamination worldwide is a concerning reality that can be addressed with appropriate society education as well as looking for innovative polymeric alternatives based on the reuse of waste and recycling with a circular economy point of view, thus taking into consideration that a future world without plastic is quite impossible to conceive. In this regard, in this review, we focus on sustainable polymeric materials, biodegradable and bio-based polymers, additives, and micro/nanoparticles to be used to obtain new environmentally friendly polymeric-based materials. Although biodegradable polymers possess poorer overall properties than traditional ones, they have gained a huge interest in many industrial sectors due to their inherent biodegradability in natural environments. Therefore, several strategies have been proposed to improve their properties and extend their industrial applications. Blending strategies, as well as the development of composites and nanocomposites, have shown promising perspectives for improving their performances, emphasizing biopolymeric blend formulations and bio-based micro and nanoparticles to produce fully sustainable polymeric-based materials. The Review also summarizes recent developments in polymeric blends, composites, and nanocomposite plasticization, with a particular focus on naturally derived plasticizers and their chemical modifications to increase their compatibility with the polymeric matrices. The current state of the art of the most important bio-based and biodegradable polymers is also reviewed, mainly focusing on their synthesis and processing methods scalable to the industrial sector, such as melt and solution blending approaches like melt-extrusion, injection molding, film forming as well as solution electrospinning, among others, without neglecting their degradation processes.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Instituto de Ciencia y Tecnología de Polímeros, ICTP-CSIC, Calle Juan de la Cierva 3, 28006 Madrid, Spain.
- Instituto Universitario de Tecnología de Materiales (IUTM), Universitat Politècnica de València (UPV), Plaza Ferrándiz y Carbonell 1, 03801 Alcoy, Spain.
- Departamento de Ingeniería Química Industrial y del Medio Ambiente, Escuela Técnica Superior de Ingenieros Industriales, Universidad Politécnica de Madrid (ETSII-UPM), Calle José Gutiérrez Abascal 2, 28006 Madrid, Spain.
- Laboratory of Obtention, Modification, Characterization, and Evaluation of Materials (LOMCEM), Department of Science and Technology, University of Quilmes, Bernal B1876BXD, Argentina.
- National Scientific and Technical Research Council (CONICET), Buenos Aires C1425FQB, Argentina.
- Grupo de Investigación en Polímeros, Caracterización y Aplicaciones (POLCA), 28006 Madrid, Spain.
ORCID-Profile: Víctor Oliver-Cuenca, Valentina Salaris, Pedro Francisco Muñoz-Gimena, Mercedes A Peltzer, Victoria Alcázar Montero, Marina P Arrieta, Jaume Sempere-Torregrosa, Cristina Pavon, Gema Rodríguez Crespo, Jose M Kenny, Daniel López, Laura Peponi
Förderung
- Agencia Estatal de Investigación
- Fondo Europeo de Desarrollo Regional (FEDER, EU)
- NextGenerationEU MRR
Zitieren
APA
Oliver-Cuenca, V., Salaris, V., Muñoz-Gimena, P. F., Agüero, Á., Peltzer, M. A., Montero, V. A., Arrieta, M. P., Sempere-Torregrosa, J., Pavon, C., Samper, M. D., Crespo, G. R., Kenny, J. M., López, D., & Peponi, L. (2024). Bio-Based and Biodegradable Polymeric Materials for a Circular Economy. Polymers, 16(21), 3015. https://doi.org/10.3390/polym16213015
Vancouver
Oliver-Cuenca V, Salaris V, Muñoz-Gimena PF, Agüero Á, Peltzer MA, Montero VA, et al. Bio-Based and Biodegradable Polymeric Materials for a Circular Economy. Polymers. 2024;16(21):3015. doi:10.3390/polym16213015
BibTeX
@article{OliverCuenca2024,
author = {Oliver-Cuenca, Víctor and Salaris, Valentina and Muñoz-Gimena, Pedro Francisco and Agüero, Ángel and Peltzer, Mercedes A and Montero, Victoria Alcázar and Arrieta, Marina P and Sempere-Torregrosa, Jaume and Pavon, Cristina and Samper, Maria Dolores and Crespo, Gema Rodríguez and Kenny, Jose M and López, Daniel and Peponi, Laura},
title = {Bio-Based and Biodegradable Polymeric Materials for a Circular Economy},
journal = {Polymers},
year = {2024},
volume = {16},
number = {21},
pages = {3015},
doi = {10.3390/polym16213015}
}
EUVIMED