EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Experimental and Numerical Analysis of Bolted Repair for Composite Laminates with Delamination Damage

Shan Xiao, Mingxuan Huang, Zhonghai Xu iD, Yusong Yang, Shanyi Du

Polymers · 17.10.2024 · 16 (20) · 2918

DOI: 10.3390/polym16202918 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 17.10.2024. Verfasst von Shan Xiao und 4 weiteren Autor:innen. Beteiligte Einrichtung: National Key Laboratory of Science and Technology on Advanced Composites in Special Environments, Harbin Institute of Technology, Harbin 150080, Chin…. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Science Foundation of National Key Laboratory of Science and Technology on Advanced Composites in Special Environments.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Composite materials are widely used in aircraft due to the urgent need for high-quality structures in aerospace engineering. In order to verify the effectiveness of complex bolt repairs on composite structures, compression tests have been performed on three types (intact, damaged, and repaired) of composite plate specimens, and finite element simulation results of these three types’ specimens were obtained. The experimental results show that for damaged composite laminates, the strength recovery after bolt repair can reach an impressive 107%, and the delamination propagation caused by over-buckling deformation is considered to be the main cause of failure, which also suggests that although bolt repair can improve the strength of the specimens, it has a limited ability to inhibit delamination propagation. The simulation results of the finite element model in this paper are in good agreement with the actual experimental results, and the maximum error does not exceed 7.9%. In conclusion, this paper verifies the suitability of the proposed repair scheme in engineering applications and the correctness of the modeling method for repaired composite laminates.

Schlagwörter

Stichwörter der Autor:innen

bolted repaircompositefinite element method

Autor:innen und Institutionen

  • National Key Laboratory of Science and Technology on Advanced Composites in Special Environments, Harbin Institute of Technology, Harbin 150080, China.
  • Shenyang Aircraft Design and Research Institute, Shenyang 110135, China.
  • No.1 Military Representative Office of Shenyang Military Representative Bureau of PLA Air Force Armament Department, Shenyang 110034, China.

ORCID-Profile: Zhonghai Xu

Förderung

  • National Natural Science Foundation of China
  • Science Foundation of National Key Laboratory of Science and Technology on Advanced Composites in Special Environments

Zitieren

APA

Xiao, S., Huang, M., Xu, Z., Yang, Y., & Du, S. (2024). Experimental and Numerical Analysis of Bolted Repair for Composite Laminates with Delamination Damage. Polymers, 16(20), 2918. https://doi.org/10.3390/polym16202918

Vancouver

Xiao S, Huang M, Xu Z, Yang Y, Du S. Experimental and Numerical Analysis of Bolted Repair for Composite Laminates with Delamination Damage. Polymers. 2024;16(20):2918. doi:10.3390/polym16202918

BibTeX
@article{Xiao2024,
  author = {Xiao, Shan and Huang, Mingxuan and Xu, Zhonghai and Yang, Yusong and Du, Shanyi},
  title = {Experimental and Numerical Analysis of Bolted Repair for Composite Laminates with Delamination Damage},
  journal = {Polymers},
  year = {2024},
  volume = {16},
  number = {20},
  pages = {2918},
  doi = {10.3390/polym16202918}
}
Kostenlos starten →