Easily Applicable Superhydrophobic Composite Coating with Improved Corrosion Resistance and Delayed Icing Properties
Polymers · 03.10.2024 · 16 (19) · 2800
DOI: 10.3390/polym16192800 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 03.10.2024. Verfasst von Binbin Zhang und 2 weiteren Autor:innen. Beteiligte Einrichtung: Key Laboratory of Advanced Marine Materials, Key Laboratory of Marine Environmental Corrosion and Bio-Fouling, Institute of Oceanology, Chinese Acade…. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Shandong Provincial Natural Science Foundation, Youth Innovation Promotion Association of Chinese Academy of Sciences, Taishan Scholars Program.
Abstract (Originalsprache)
Mitigating the adverse effects of corrosion failure and low-temperature icing on aluminum (Al) alloy materials poses significant research challenges. The facile fabrication of bioinspired superhydrophobic materials offers a promising solution to the issues of corrosion and icing. In this study, we utilized laboratory-collected candle soot (CS), hydrophobic fumed SiO2, and epoxy resin (EP) to create a HF-SiO2@CS@EP superhydrophobic coating on Al alloy surfaces using a spray-coating technique. Various characterization techniques, including contact angle meter, high-speed camera, FE-SEM, EDS, FTIR, and XPS, were employed to investigate surface wettability, morphologies, and chemical compositions. Moreover, a 3.5 wt.% NaCl solution was used as a corrosive medium to evaluate the corrosion resistance of the uncoated and coated samples. The results show that the capacitive arc radius, charge transfer resistance, and low-frequency modulus of the coated Al alloy significantly increased, while the corrosion potential (Ecorr) shifted positively and the corrosion current (Icorr) decreased by two orders of magnitude, indicating improved corrosion resistance. Additionally, an investigation of ice formation on the coated Al alloy at −10 °C revealed that the freezing time was 4.75 times longer and the ice adhesion strength was one-fifth of the uncoated Al alloy substrate, demonstrating superior delayed icing and reduced ice adhesion strength performance.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Key Laboratory of Advanced Marine Materials, Key Laboratory of Marine Environmental Corrosion and Bio-Fouling, Institute of Oceanology, Chinese Academy of Sciences, Qingdao 266071, China.
- University of Chinese Academy of Sciences, Beijing 100049, China.
Förderung
- Shandong Provincial Natural Science Foundation
- Youth Innovation Promotion Association of Chinese Academy of Sciences
- Taishan Scholars Program
Zitieren
APA
Zhang, B., Zhao, L., & Hou, B. (2024). Easily Applicable Superhydrophobic Composite Coating with Improved Corrosion Resistance and Delayed Icing Properties. Polymers, 16(19), 2800. https://doi.org/10.3390/polym16192800
Vancouver
Zhang B, Zhao L, Hou B. Easily Applicable Superhydrophobic Composite Coating with Improved Corrosion Resistance and Delayed Icing Properties. Polymers. 2024;16(19):2800. doi:10.3390/polym16192800
BibTeX
@article{Zhang2024,
author = {Zhang, Binbin and Zhao, Lixia and Hou, Baorong},
title = {Easily Applicable Superhydrophobic Composite Coating with Improved Corrosion Resistance and Delayed Icing Properties},
journal = {Polymers},
year = {2024},
volume = {16},
number = {19},
pages = {2800},
doi = {10.3390/polym16192800}
}
EUVIMED