Synthesis and Characterization of Rebondable Polyurethane Adhesives Relying on Thermo-Activated Transcarbamoylation
Polymers · 03.10.2024 · 16 (19) · 2799
DOI: 10.3390/polym16192799 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 03.10.2024. Verfasst von Daniel Bautista-Anguís und 6 weiteren Autor:innen. Beteiligte Einrichtung: Polymer Competence Center Leoben GmbH (PCCL), Sauraugasse 1, 8700 Leoben, Austria. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 46 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Österreichische Forschungsförderungsgesellschaft, Climate and Energy Fund of the Austrian Federal Government, COMET-Module project, “Repairtecture”.
Abstract (Originalsprache)
Dynamic polymer networks combine the noteworthy (thermo)mechanical features of thermosets with the processability of thermoplastics. They rely on externally triggered bond exchange reactions, which induce topological rearrangements and, at a sufficiently high rate, a macroscopic reflow of the polymer network. Due to this controlled change in viscosity, dynamic polymers are repairable, malleable, and reprocessable. Herein, several dynamic polyurethane networks were synthetized as model compounds, which were able to undergo thermo-activated transcarbamoylation for the use in rebondable adhesives. Ethylenediamine-N,N,N′,N′-tetra-2-propanol (EDTP) was applied as a transcarbamoylation catalyst, which participates in the curing reaction across its four -OH groups and thus, is covalently attached within the polyurethane network. Both bond exchange rate and (thermo)mechanical properties of the dynamic networks were readily adjusted by the crosslink density and availability of -OH groups. In a last step, the most promising model compound was optimized to prepare an adhesive formulation more suitable for a real case application. Single-lap shear tests were carried out to evaluate the bond strength of this final formulation in adhesively bonded carbon fiber reinforced polymers (CFRP). Exploiting the dynamic nature of the adhesive layer, the debonded CFRP test specimens were rebonded at elevated temperature. The results clearly show that thermally triggered rebonding was feasible by recovering up to 79% of the original bond strength.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Polymer Competence Center Leoben GmbH (PCCL), Sauraugasse 1, 8700 Leoben, Austria.
ORCID-Profile: Markus Wolfahrt, Sandra Schlögl
Förderung
- Österreichische Forschungsförderungsgesellschaft
- Climate and Energy Fund of the Austrian Federal Government
- COMET-Module project, “Repairtecture”
- Austrian Government and the State Governments of Styria and Upper Austria
Zitieren
APA
Bautista-Anguís, D., Reiner, L., Röper, F., Maar, S., Wolfahrt, M., Wolfberger, A., & Schlögl, S. (2024). Synthesis and Characterization of Rebondable Polyurethane Adhesives Relying on Thermo-Activated Transcarbamoylation. Polymers, 16(19), 2799. https://doi.org/10.3390/polym16192799
Vancouver
Bautista-Anguís D, Reiner L, Röper F, Maar S, Wolfahrt M, Wolfberger A, et al. Synthesis and Characterization of Rebondable Polyurethane Adhesives Relying on Thermo-Activated Transcarbamoylation. Polymers. 2024;16(19):2799. doi:10.3390/polym16192799
BibTeX
@article{BautistaAngus2024,
author = {Bautista-Anguís, Daniel and Reiner, Lisbeth and Röper, Florian and Maar, Sebastian and Wolfahrt, Markus and Wolfberger, Archim and Schlögl, Sandra},
title = {Synthesis and Characterization of Rebondable Polyurethane Adhesives Relying on Thermo-Activated Transcarbamoylation},
journal = {Polymers},
year = {2024},
volume = {16},
number = {19},
pages = {2799},
doi = {10.3390/polym16192799}
}
EUVIMED