EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Critical Cooling Rate of Fast-Crystallizing Polyesters: The Example of Poly(alkylene trans-1,4-cyclohexanedicarboxylate)

Kylian Hallavant iD, Michelina Soccio iD, Giulia Guidotti iD, Nadia Lotti iD, Antonella Esposito iD, Allisson Saiter-Fourcin iD

Polymers · 01.10.2024 · 16 (19) · 2792

DOI: 10.3390/polym16192792 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 01.10.2024. Verfasst von Kylian Hallavant und 5 weiteren Autor:innen. Beteiligte Einrichtung: INSA Rouen Normandie, CNRS, Groupe de Physique des Matériaux UMR 6634, University Rouen Normandie, F-76000 Rouen, France. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 71 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Erasmus+ mobility grant, PhD financial support for Kylian Hallavant.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Controlling the cooling rate experienced by a material during a manufacturing process is a challenge and a major issue. Industrial processing techniques are very diverse and may involve a whole range of cooling rates, which are sometimes extremely high for small and/or thin manufactured parts. For polymers, the cooling rate has consequences on both the microstructure and the time-dependent properties. The common cooling rates associated with conventional calorimetric measurements are generally limited to a few tens of degrees per minute. This work combines several calorimetric techniques (DSC, modulated-temperature DSC, stochastically-modulated DSC and Fast Scanning Calorimetry) to estimate the critical cooling rate required to melt-quench fast-crystallizing polyesters to their fully amorphous state, based on the example of a series of poly(alkylene trans-1,4-cyclohexanedicarboxylate) (PCHs) with a number of methylene groups in the main structure of the repeating unit nCH2 varying from 3 to 6. The even-numbered ones require faster cooling rates (about 3000 K s−1 for nCH2 = 4, between 500 and 1000 K s−1 for nCH2 = 6) compared to the odd-numbered ones (between 50 K min−1 and 100 K s−1 for nCH2 = 3, between 10 and 30 K min−1 for nCH2 = 5).

Schlagwörter

Stichwörter der Autor:innen

crystallization kineticsmicrostructure controlodd-even effectquenching

Autor:innen und Institutionen

  • INSA Rouen Normandie, CNRS, Groupe de Physique des Matériaux UMR 6634, University Rouen Normandie, F-76000 Rouen, France.
  • Department of Civil, Chemical, Environmental and Materials Engineering, University of Bologna, Via Terracini 28, 40131 Bologna, Italy.
  • Interdepartmental Center for Industrial Research on Advanced Applications in Mechanical Engineering and Materials Technology, CIRI-MAM, Viale del Risorgimento 2, 40136 Bologna, Italy.
  • Interdepartmental Center for Industrial Research on Buildings and Construction, CIRI-EC, Via del Lazzaretto 15/5, 40131 Bologna, Italy.
  • Interdepartmental Center for Agro-Food Research, CIRI-AGRO, Via Quinto Bucci 336, 47521 Cesena, Italy.

ORCID-Profile: Kylian Hallavant, Michelina Soccio, Giulia Guidotti, Nadia Lotti, Antonella Esposito, Allisson Saiter-Fourcin

Förderung

  • Erasmus+ mobility grant
  • PhD financial support for Kylian Hallavant

Zitieren

APA

Hallavant, K., Soccio, M., Guidotti, G., Lotti, N., Esposito, A., & Saiter-Fourcin, A. (2024). Critical Cooling Rate of Fast-Crystallizing Polyesters: The Example of Poly(alkylene trans-1,4-cyclohexanedicarboxylate). Polymers, 16(19), 2792. https://doi.org/10.3390/polym16192792

Vancouver

Hallavant K, Soccio M, Guidotti G, Lotti N, Esposito A, Saiter-Fourcin A. Critical Cooling Rate of Fast-Crystallizing Polyesters: The Example of Poly(alkylene trans-1,4-cyclohexanedicarboxylate). Polymers. 2024;16(19):2792. doi:10.3390/polym16192792

BibTeX
@article{Hallavant2024,
  author = {Hallavant, Kylian and Soccio, Michelina and Guidotti, Giulia and Lotti, Nadia and Esposito, Antonella and Saiter-Fourcin, Allisson},
  title = {Critical Cooling Rate of Fast-Crystallizing Polyesters: The Example of Poly(alkylene trans-1,4-cyclohexanedicarboxylate)},
  journal = {Polymers},
  year = {2024},
  volume = {16},
  number = {19},
  pages = {2792},
  doi = {10.3390/polym16192792}
}
Kostenlos starten →