Morphological, Thermal, and Mechanical Assessment of Polypropylene and Ammonium Phosphate Composites Enhanced with Lignosulfonate and Zirconium
Polymers · 26.09.2024 · 16 (19) · 2727
DOI: 10.3390/polym16192727 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 26.09.2024. Verfasst von Keiti Gilioli Tosin und 2 weiteren Autor:innen. Beteiligte Einrichtung: Postgraduate Program in Process Engineering and Technologies, University of Caxias do Sul, Caxias do Sul 95000-000, Brazil. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Polypropylene and ammonium phosphate (AP) composites were synthesized at a 25 wt% concentration. The changes in the morphological, thermal, and physical behavior of the composites were analyzed with the addition of lignosulfonate (LG) and zirconium phosphate (ZrP). Additionally, metallic zirconium was deposited onto lignosulfonate using the magnetron sputtering technique to develop polypropylene and zirconium-modified lignosulfonate (LGMod) composites. Thus, composites of PP/25AP, PP/25AP/8LG/5ZrP, and PP/25AP/8LGMod were synthesized. The synthesis involved mixing the materials in a Hake mixer, followed by compression molding. The composites were characterized by field emission scanning electron microscopy (SEM–EDS), a thermogravimetric analysis (TGA) with combustion parameters, a vertical burn test (UL-94), a thermal camera, and mechanical properties. All composites achieved a V2 rating according to UL-94 standards. The PP/25AP extinguishes flames more quickly compared to other materials, approximately 99.2% faster than PP and showed the lowest temperature variation and mass loss after burning. The PP/25AP/8LG/5ZrP composite exhibited a 7% higher rigidity and 84.5% better flame retardancy compared to pure PP. Additionally, substituting ZrP with LGMod led to a lower environmental impact and improved thermal properties, despite some mechanical disadvantages.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Postgraduate Program in Process Engineering and Technologies, University of Caxias do Sul, Caxias do Sul 95000-000, Brazil.
- Graduate Program in Materials Science and Engineering, University of Caxias do Sul, Caxias do Sul 95000-000, Brazil.
ORCID-Profile: Matheus Poletto
Zitieren
APA
Tosin, K. G., Aguzzoli, C., & Poletto, M. (2024). Morphological, Thermal, and Mechanical Assessment of Polypropylene and Ammonium Phosphate Composites Enhanced with Lignosulfonate and Zirconium. Polymers, 16(19), 2727. https://doi.org/10.3390/polym16192727
Vancouver
Tosin KG, Aguzzoli C, Poletto M. Morphological, Thermal, and Mechanical Assessment of Polypropylene and Ammonium Phosphate Composites Enhanced with Lignosulfonate and Zirconium. Polymers. 2024;16(19):2727. doi:10.3390/polym16192727
BibTeX
@article{Tosin2024,
author = {Tosin, Keiti Gilioli and Aguzzoli, Cesar and Poletto, Matheus},
title = {Morphological, Thermal, and Mechanical Assessment of Polypropylene and Ammonium Phosphate Composites Enhanced with Lignosulfonate and Zirconium},
journal = {Polymers},
year = {2024},
volume = {16},
number = {19},
pages = {2727},
doi = {10.3390/polym16192727}
}
EUVIMED