Influence of Graphene Nanoplatelets and Post-Curing Conditions on the Mechanical and Viscoelastic Properties of Stereolithography 3D-Printed Nanocomposites
Polymers · 26.09.2024 · 16 (19) · 2721
DOI: 10.3390/polym16192721 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 26.09.2024. Verfasst von Khalid Haj Ahmad und 2 weiteren Autor:innen. Beteiligte Einrichtung: Enhanced Polymer Research Group, Faculty of Chemical and Energy Engineering, Universiti Teknologi Malaysia, Johor Bahru, Skudai 81310, Malaysia. Die Arbeit wurde bisher 27-mal zitiert (Crossref) und nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This study presents an innovative approach to improving the mechanical and viscoelastic properties of 3D-printed stereolithography (SLA) nanocomposites by incorporating graphene nanoplatelets (xGNP) into photopolymer matrices. Utilizing an SLA 3D printer, photopolymer formulations with xGNP concentrations of up to 0.25 wt% were successfully produced. Post-print curing was carried out using two different methods: ultraviolet (UV) curing and high-temperature curing at 160 °C. Mechanical characterization using nanoindentation showed a significant increase in elastic modulus by 104% and an increase in hardness by 85% for nanocomposites containing 0.25 wt% xGNP. Furthermore, dynamic mechanical analysis (DMA) revealed a 39% improvement in storage modulus for samples without post-curing and an improvement of approximately 30% for samples subjected to high-temperature curing. These significant improvements highlight xGNP’s potential to not only increase the performance of SLA 3D-printed components but also streamline the manufacturing process by reducing or eliminating energy-intensive post-curing steps. This innovative integration of graphene nanoplatelets paves the way for the production of high-performance, functional 3D-printed products and offers significant advances for various industries with a high impact. The results highlight the transformative role of nanomaterials in additive manufacturing and position this work at the forefront of materials science and 3D printing technology.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Enhanced Polymer Research Group, Faculty of Chemical and Energy Engineering, Universiti Teknologi Malaysia, Johor Bahru, Skudai 81310, Malaysia.
- College of Engineering, Alfaisal University, P.O. Box 50927, Riyadh 11533, Saudi Arabia.
ORCID-Profile: Khalid Haj Ahmad, Zurina Mohamad, Zahid Iqbal Khan
Zitieren
APA
Ahmad, K. H., Mohamad, Z., & Khan, Z. I. (2024). Influence of Graphene Nanoplatelets and Post-Curing Conditions on the Mechanical and Viscoelastic Properties of Stereolithography 3D-Printed Nanocomposites. Polymers, 16(19), 2721. https://doi.org/10.3390/polym16192721
Vancouver
Ahmad KH, Mohamad Z, Khan ZI. Influence of Graphene Nanoplatelets and Post-Curing Conditions on the Mechanical and Viscoelastic Properties of Stereolithography 3D-Printed Nanocomposites. Polymers. 2024;16(19):2721. doi:10.3390/polym16192721
BibTeX
@article{Ahmad2024,
author = {Ahmad, Khalid Haj and Mohamad, Zurina and Khan, Zahid Iqbal},
title = {Influence of Graphene Nanoplatelets and Post-Curing Conditions on the Mechanical and Viscoelastic Properties of Stereolithography 3D-Printed Nanocomposites},
journal = {Polymers},
year = {2024},
volume = {16},
number = {19},
pages = {2721},
doi = {10.3390/polym16192721}
}
EUVIMED