Smart Carbon Fiber-Reinforced Polymer Composites for Damage Sensing and On-Line Structural Health Monitoring Applications
Polymers · 24.09.2024 · 16 (19) · 2698
DOI: 10.3390/polym16192698 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 24.09.2024. Verfasst von Cláudia Lopes und 9 weiteren Autor:innen. Beteiligte Einrichtung: Physics Centre of Minho and Porto Universities (CF-UM-UP), University of Minho, 4710-057 Braga, Portugal. Die Arbeit wurde bisher 15-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: SmartFan - Smart by design and intelligent by architecture for turbine blade fan and structural components system, Cost Action High-performance carbon-based composites with Smart properties for Advanced Sensing Applications, Fundação para a Ciência e a Tecnologia (FCT) - LAETA Base Funding.
Abstract (Originalsprache)
High electrical conductivity, along with high piezoresistive sensitivity and stretchability, are crucial for designing and developing nanocomposite strain sensors for damage sensing and on-line structural health monitoring of smart carbon fiber-reinforced polymer (CFRP) composites. In this study, the influence of the geometric features and loadings of carbon-based nanomaterials, including reduced graphene oxide (rGO) or carbon nanofibers (CNFs), on the tunable strain-sensing capabilities of epoxy-based nanocomposites was investigated. This work revealed distinct strain-sensing behavior and sensitivities (gauge factor, GF) depending on both factors. The highest GF values were attained with 0.13 wt.% of rGO at various strains. The stability and reproducibility of the most promising self-sensing nanocomposites were also evaluated through ten stretching/relaxing cycles, and a distinct behavior was observed. While the deformation of the conductive network formed by rGO proved to be predominantly elastic and reversible, nanocomposite sensors containing 0.714 wt.% of CNFs showed that new conductive pathways were established between neighboring CNFs. Based on the best results, formulations were selected for the manufacturing of pre-impregnated materials and related smart CFRP composites. Digital image correlation was synchronized with electrical resistance variation to study the strain-sensing capabilities of modified CFRP composites (at 90° orientation). Promising results were achieved through the incorporation of CNFs since they are able to form new conductive pathways and penetrate between micrometer-sized fibers.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Physics Centre of Minho and Porto Universities (CF-UM-UP), University of Minho, 4710-057 Braga, Portugal.
- LaPMET-Laboratory of Physics for Materials and Emergent Technologies, University of Minho, 4710-057 Braga, Portugal.
- INEGI-Institute of Science and Innovation in Mechanical and Industrial Engineering, 4200-465 Porto, Portugal.
- FORTH/ICE-HT Institute of Chemical Engineering Sciences, Foundation of Research and Technology Hellas, 26504 Patras, Greece.
- R-NANO-Research Lab of Advanced, Composite, Nano-Materials and Nanotechnology, Materials Science and Engineering Department, School of Chemical Engineering, National Technical University of Athens, 15773 Athens, Greece.
- IPC-Institute for Polymers and Composites, University of Minho, Campus de Azurém, 4800-058 Guimarães, Portugal.
ORCID-Profile: Cláudia Lopes, Andreia Araújo, Fernando Silva, Stefania Termine, Aikaterini-Flora A Trompeta, Costas A Charitidis, Carla Martins, Sacha T Mould, Raquel M Santos
Förderung
- SmartFan - Smart by design and intelligent by architecture for turbine blade fan and structural components system
- Cost Action High-performance carbon-based composites with Smart properties for Advanced Sensing Applications
- Fundação para a Ciência e a Tecnologia (FCT) - LAETA Base Funding
- SmartFan–Smart
- European Union
- Cost Action “High-performance carbon-based composites with Smart properties for Advanced Sensing Applications” (EsSENce)
- Fundação para a Ciência e a Tecnologia (FCT)
Zitieren
APA
Lopes, C., Araújo, A., Silva, F., Pappas, P. N., Termine, S., Trompeta, A. A., Charitidis, C. A., Martins, C., Mould, S. T., & Santos, R. M. (2024). Smart Carbon Fiber-Reinforced Polymer Composites for Damage Sensing and On-Line Structural Health Monitoring Applications. Polymers, 16(19), 2698. https://doi.org/10.3390/polym16192698
Vancouver
Lopes C, Araújo A, Silva F, Pappas PN, Termine S, Trompeta AA, et al. Smart Carbon Fiber-Reinforced Polymer Composites for Damage Sensing and On-Line Structural Health Monitoring Applications. Polymers. 2024;16(19):2698. doi:10.3390/polym16192698
BibTeX
@article{Lopes2024,
author = {Lopes, Cláudia and Araújo, Andreia and Silva, Fernando and Pappas, Panagiotis-Nektarios and Termine, Stefania and Trompeta, Aikaterini-Flora A and Charitidis, Costas A and Martins, Carla and Mould, Sacha T and Santos, Raquel M},
title = {Smart Carbon Fiber-Reinforced Polymer Composites for Damage Sensing and On-Line Structural Health Monitoring Applications},
journal = {Polymers},
year = {2024},
volume = {16},
number = {19},
pages = {2698},
doi = {10.3390/polym16192698}
}
EUVIMED