EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Bio-Epoxy Resins Based on Lignin and Tannic Acids as Wood Adhesives—Characterization and Bonding Properties

Ivana Gavrilović-Grmuša iD, Milica Rančić iD, Tamara Tešić iD, Stevan Stupar, Milena Milošević, Jelena Gržetić iD

Polymers · 14.09.2024 · 16 (18) · 2602

DOI: 10.3390/polym16182602 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 14.09.2024. Verfasst von Ivana Gavrilović-Grmuša und 5 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Forestry, University of Belgrade, 11030 Belgrade, Serbia. Die Arbeit wurde bisher 28-mal zitiert (Crossref) und nennt 49 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Science, Technological Development and Innovation of the Republic of Serbia.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The possibility of producing and designing bio-epoxides based on the natural polyphenol lignin/epoxidized lignin and tannic acids for application as wood adhesives is presented in this work. Lignin and tannic acids contain numerous reactive hydroxyl phenolic moieties capable of being efficiently involved in the reaction with commercial epoxy resins as a substitute for commercial, non-environmentally friendly, toxic amine-based hardeners. Furthermore, lignin was epoxidized in order to obtain an epoxy lignin that can be a replacement for diglycidyl ether bisphenol A (DGEBA). Cross-linking of bio-epoxy epoxides was investigated via FTIR spectroscopy and their prospects for wood adhesive application were evaluated. This study determined that the curing reaction of epoxy resin can be conducted using lignin/epoxy lignin or tannic acid. Tensile shear strength testing results showed that lignin and tannic acid can effectively replace amine hardeners in epoxy resins. Examination of the failure of the samples showed that all samples had a 100% fracture through the wood. All samples of bio-epoxy adhesives displayed significant tensile shear strength in the range of 5.84–10.87 MPa. This study presents an innovative approach to creating novel cross-linked networks of eco-friendly and high-performance wood bio-adhesives.

Schlagwörter

Stichwörter der Autor:innen

bio-epoxidesbio-hardenerepoxy ligninlignintannic acidtensile shear strength

Autor:innen und Institutionen

  • Faculty of Forestry, University of Belgrade, 11030 Belgrade, Serbia.
  • Military Technical Institute, Ratka Resanovića 1, 11000 Belgrade, Serbia.
  • Institute of Chemistry, Technology and Metallurgy, National Institute of the Republic of Serbia, University of Belgrade, 11000 Belgrade, Serbia.

ORCID-Profile: Ivana Gavrilović-Grmuša, Milica Rančić, Tamara Tešić, Jelena Gržetić

Förderung

  • Ministry of Science, Technological Development and Innovation of the Republic of Serbia

Zitieren

APA

Gavrilović-Grmuša, I., Rančić, M., Tešić, T., Stupar, S., Milošević, M., & Gržetić, J. (2024). Bio-Epoxy Resins Based on Lignin and Tannic Acids as Wood Adhesives—Characterization and Bonding Properties. Polymers, 16(18), 2602. https://doi.org/10.3390/polym16182602

Vancouver

Gavrilović-Grmuša I, Rančić M, Tešić T, Stupar S, Milošević M, Gržetić J. Bio-Epoxy Resins Based on Lignin and Tannic Acids as Wood Adhesives—Characterization and Bonding Properties. Polymers. 2024;16(18):2602. doi:10.3390/polym16182602

BibTeX
@article{GavriloviGrmua2024,
  author = {Gavrilović-Grmuša, Ivana and Rančić, Milica and Tešić, Tamara and Stupar, Stevan and Milošević, Milena and Gržetić, Jelena},
  title = {Bio-Epoxy Resins Based on Lignin and Tannic Acids as Wood Adhesives—Characterization and Bonding Properties},
  journal = {Polymers},
  year = {2024},
  volume = {16},
  number = {18},
  pages = {2602},
  doi = {10.3390/polym16182602}
}
Kostenlos starten →