Evaluation of Mechanical Properties of Composite Material with a Thermoplastic Matrix Reinforced with Cellulose Acetate Microfibers
Polymers · 10.09.2024 · 16 (18) · 2557
DOI: 10.3390/polym16182557 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 10.09.2024. Verfasst von Pedro Rodríguez Sandoval und 3 weiteren Autor:innen. Beteiligte Einrichtung: Grupo de Investigación de Materiales y Ensayos-GIMES, SENA-Centro de Materiales y Ensayos, Escuela de Posgrado en Ingeniería, Universidad Pedagógica …. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 24 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Pedagogical and Technological University of Colombia (UPTC).
Abstract (Originalsprache)
Low-density polyethylene (LDPE) has been widely used in various applications due to its flexibility, lightness, and low production cost. However, its massive use in disposable products has raised environmental concerns, prompting the search for more sustainable alternatives. This study aims to investigate the mechanical properties achievable in a composite material utilizing low-density polyethylene (LDPE), potato starch (PS), and cellulose microfibrils (MFCA) at loadings of 0.05%, 0.15%, and 0.30%. Initially, the cellulose acetate microfibrils (MFCA) were produced via an electrospinning process. Subsequently, a dispersive mixture of the aforementioned materials was created through the extrusion and pelletizing process to form pellets. These pellets were then molded by injection molding to produce test specimens in accordance with ASTM D 638, the standard for tensile strength testing. The evaluation of the properties was conducted through mechanical tensile tests (ASTM D638), hardness tests (ASTM D 2240), melt flow index (ASTM D1238), and scanning electron microscopy (SEM). This study determined the influence of cellulose acetate microfibril loadings below 0.3% as reinforcement within a thermoplastic LDPE matrix. It was demonstrated that these microfibrils, due to their length-to-diameter ratio, contribute to an enhancement in the mechanical properties.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Grupo de Investigación de Materiales y Ensayos-GIMES, SENA-Centro de Materiales y Ensayos, Escuela de Posgrado en Ingeniería, Universidad Pedagógica y Tecnológica de Colombia, UPTC, Tunja 150003, Colombia.
- Grupo de Investigación en Diseño, Innovación y Asistencia Técnica para Materiales Avanzados-DITMAV, Maestría en Metalurgia y Ciencia de los Materiales, Universidad Pedagógica y Tecnológica de Colombia-UPTC, Tunja 150003…
- Grupo de Investigación en Diseño, Innovación y Asistencia Técnica para Materiales Avanzados-DITMAV, Escuela de Diseño Industrial, Universidad Pedagógica y Tecnológica de Colombia-UPTC, Duitama 150461, Colombia.
- Instituto de Investigaciones en Materiales, Universidad Nacional Autónoma de México, Mexico City 04510, Mexico.
ORCID-Profile: Andres Felipe Rubiano-Navarrete, Edwin Yesid Gómez-Pachón, Ricardo Vera-Graziano
Förderung
- Pedagogical and Technological University of Colombia (UPTC)
Zitieren
APA
Rodríguez Sandoval, P., Rubiano-Navarrete, A. F., Gómez-Pachón, E. Y., & Vera-Graziano, R. (2024). Evaluation of Mechanical Properties of Composite Material with a Thermoplastic Matrix Reinforced with Cellulose Acetate Microfibers. Polymers, 16(18), 2557. https://doi.org/10.3390/polym16182557
Vancouver
Rodríguez Sandoval P, Rubiano-Navarrete AF, Gómez-Pachón EY, Vera-Graziano R. Evaluation of Mechanical Properties of Composite Material with a Thermoplastic Matrix Reinforced with Cellulose Acetate Microfibers. Polymers. 2024;16(18):2557. doi:10.3390/polym16182557
BibTeX
@article{RodrguezSandoval2024,
author = {Rodríguez Sandoval, Pedro and Rubiano-Navarrete, Andres Felipe and Gómez-Pachón, Edwin Yesid and Vera-Graziano, Ricardo},
title = {Evaluation of Mechanical Properties of Composite Material with a Thermoplastic Matrix Reinforced with Cellulose Acetate Microfibers},
journal = {Polymers},
year = {2024},
volume = {16},
number = {18},
pages = {2557},
doi = {10.3390/polym16182557}
}
EUVIMED