EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitOpen Access · CC BY 4.0

Plasma Treatment of Nanocellulose to Improve the Surface Properties

Gregor Primc iD, Miran Mozetič iD

Polymers · 04.09.2024 · 16 (17) · 2516

DOI: 10.3390/polym16172516 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Polymers, online erschienen am 04.09.2024. Verfasst von Gregor Primc und 1 weiteren Autor:innen. Beteiligte Einrichtung: Department of Surface Engineering, Jozef Stefan Institute, Jamova cesta 39, 1000 Ljubljana, Slovenia. Die Arbeit wurde bisher 20-mal zitiert (Crossref) und nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Slovenian Research and Innovation Agency.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Nanocellulose is among the most promising materials for enhancing the mechanical properties of polymer composites. Broad application is, however, limited by inadequate surface properties. A standard technique for tailoring the surface composition and wettability of polymers is a brief treatment with non-equilibrium gaseous plasma, but it often fails when treating materials with a large surface-to-mass ratio, such as cellulose nanofibers. In this paper, the theoretical limitations are explained, the approaches reported by different groups are reviewed, and the results are interpreted. The treatment of dry nanocellulose is limited by the ability of uniform treatment, whereas the plasma treatment of nanocellulose dispersed in liquids is a slow process. The methods for enhancing the treatment efficiency for both dry and water-dispersed nanocellulose are explained.

Schlagwörter

Stichwörter der Autor:innen

nanocelluloseplasmasurfaceupscalingwettability

Autor:innen und Institutionen

  • Department of Surface Engineering, Jozef Stefan Institute, Jamova cesta 39, 1000 Ljubljana, Slovenia.

ORCID-Profile: Gregor Primc, Miran Mozetič

Förderung

  • Slovenian Research and Innovation Agency

Zitieren

APA

Primc, G., & Mozetič, M. (2024). Plasma Treatment of Nanocellulose to Improve the Surface Properties. Polymers, 16(17), 2516. https://doi.org/10.3390/polym16172516

Vancouver

Primc G, Mozetič M. Plasma Treatment of Nanocellulose to Improve the Surface Properties. Polymers. 2024;16(17):2516. doi:10.3390/polym16172516

BibTeX
@article{Primc2024,
  author = {Primc, Gregor and Mozetič, Miran},
  title = {Plasma Treatment of Nanocellulose to Improve the Surface Properties},
  journal = {Polymers},
  year = {2024},
  volume = {16},
  number = {17},
  pages = {2516},
  doi = {10.3390/polym16172516}
}
Kostenlos starten →