EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Coaxial Bioprinting of Enzymatically Crosslinkable Hyaluronic Acid-Tyramine Bioinks for Tissue Regeneration

Alma Tamunonengiofori Banigo, Laura Nauta, Bram Zoetebier iD, Marcel Karperien iD

Polymers · 30.08.2024 · 16 (17) · 2470

DOI: 10.3390/polym16172470 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 30.08.2024. Verfasst von Alma Tamunonengiofori Banigo und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Developmental BioEngineering, Faculty of Science and Technology, TechMed Centre, University of Twente, Drienerlolaan 5, 7522 NB Ensched…. Die Arbeit wurde bisher 18-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Netherlands Organization for Scientific Research (NWO), Bonny kingdom Education Trust Fund (BKETF), in Bonny Kingdom, Rivers State, Nigeria, The Netherlands Organization for Scientific Research (NWO).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Three-dimensional (3D) bioprinting has emerged as an important technique for fabricating tissue constructs with precise structural and compositional control. However, developing suitable bioinks with biocompatible crosslinking mechanisms remains a significant challenge. This study investigates extrusion-based bioprinting (EBB) using uniaxial or coaxial nozzles with enzymatic crosslinking (EC) to produce 3D tissue constructs in vitro. Initially, low-molecular-weight dextran-tyramine and hyaluronic acid-tyramine (LMW Dex-TA/HA-TA) bioink prepolymers were evaluated. Enzymatically pre-crosslinking these prepolymers, achieved by the addition of horseradish peroxidase and hydrogen peroxide, produced viscous polymer solutions. However, this approach resulted in inconsistent bioprinting outcomes (uniaxial) due to inhomogeneous crosslinking, leading to irreproducible properties and suboptimal shear recovery behavior of the hydrogel inks. To address these challenges, we explored a one-step coaxial bioprinting system consisting of enzymatically crosslinkable high-molecular-weight hyaluronic acid-tyramine conjugates (HMW HA-TA) mixed with horseradish peroxidase (HRP) in the inner core and a mixture of Pluronic F127 and hydrogen peroxide in the outer shell. This configuration resulted in nearly instantaneous gelation by diffusion of the hydrogen peroxide into the core. Stable hydrogel fibers with desirable properties, including appropriate swelling ratios and controlled degradation rates, were obtained. The optimized bioink and printing parameters included 1.3% w/v HMW HA-TA and 5.5 U/mL HRP (bioink, inner core), and 27.5% w/v Pluronic F127 and 0.1% H2O2 (sacrificial ink, outer shell). Additionally, optimal pressures for the inner core and outer shell were 45 and 80 kPa, combined with a printing speed of 300 mm/min and a bed temperature of 30 °C. The extruded HMW HA-TA core filaments, containing bovine primary chondrocytes (BPCs) or 3T3 fibroblasts (3T3 Fs), exhibited good cell viabilities and were successfully cultured for up to seven days. This study serves as a proof-of-concept for the one-step generation of core filaments using a rapidly gelling bioink with an enzymatic crosslinking mechanism, and a coaxial bioprinter nozzle system. The results demonstrate significant potential for developing designed, printed, and organized 3D tissue fiber constructs.

Schlagwörter

Stichwörter der Autor:innen

bioinkcoaxial bioprintingenzymatic crosslinkinghyaluronic acid-tyramine conjugatestissue regeneration

Autor:innen und Institutionen

  • Department of Developmental BioEngineering, Faculty of Science and Technology, TechMed Centre, University of Twente, Drienerlolaan 5, 7522 NB Enschede, The Netherlands.

ORCID-Profile: Bram Zoetebier, Marcel Karperien

Förderung

  • Netherlands Organization for Scientific Research (NWO)
  • Bonny kingdom Education Trust Fund (BKETF), in Bonny Kingdom, Rivers State, Nigeria
  • The Netherlands Organization for Scientific Research (NWO)

Zitieren

APA

Banigo, A. T., Nauta, L., Zoetebier, B., & Karperien, M. (2024). Coaxial Bioprinting of Enzymatically Crosslinkable Hyaluronic Acid-Tyramine Bioinks for Tissue Regeneration. Polymers, 16(17), 2470. https://doi.org/10.3390/polym16172470

Vancouver

Banigo AT, Nauta L, Zoetebier B, Karperien M. Coaxial Bioprinting of Enzymatically Crosslinkable Hyaluronic Acid-Tyramine Bioinks for Tissue Regeneration. Polymers. 2024;16(17):2470. doi:10.3390/polym16172470

BibTeX
@article{Banigo2024,
  author = {Banigo, Alma Tamunonengiofori and Nauta, Laura and Zoetebier, Bram and Karperien, Marcel},
  title = {Coaxial Bioprinting of Enzymatically Crosslinkable Hyaluronic Acid-Tyramine Bioinks for Tissue Regeneration},
  journal = {Polymers},
  year = {2024},
  volume = {16},
  number = {17},
  pages = {2470},
  doi = {10.3390/polym16172470}
}
Kostenlos starten →