Prediction of Glass Transition Temperature of Polymers Using Simple Machine Learning
Polymers · 29.08.2024 · 16 (17) · 2464
DOI: 10.3390/polym16172464 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 29.08.2024. Verfasst von Jaka Fajar Fatriansyah und 7 weiteren Autor:innen. Beteiligte Einrichtung: Department of Metallurgical and Materials Engineering, Faculty of Engineering, Universitas Indonesia, Kampus UI Depok, Depok 16424, Indonesia. Die Arbeit wurde bisher 18-mal zitiert (Crossref) und nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Directorate of Research and Development, Universitas Indonesia under Hibah PUTI 2024 (Grant No. NKB-505/UN2.RST/HKP.05.00/2024)"., Directorate of Research and Development, Universitas Indonesia.
Abstract (Originalsprache)
Polymer materials have garnered significant attention due to their exceptional mechanical properties and diverse industrial applications. Understanding the glass transition temperature (Tg) of polymers is critical to prevent operational failures at specific temperatures. Traditional methods for measuring Tg, such as differential scanning calorimetry (DSC) and dynamic mechanical analysis, while accurate, are often time-consuming, costly, and susceptible to inaccuracies due to random and uncertain factors. To address these limitations, the aim of the present study is to investigate the potential of Simplified Molecular Input Line Entry System (SMILES) as descriptors in simple machine learning models to predict Tg efficiently and reliably. Five models were utilized: k-nearest neighbors (KNNs), support vector regression (SVR), extreme gradient boosting (XGBoost), artificial neural network (ANN), and recurrent neural network (RNN). SMILES descriptors were converted into numerical data using either One Hot Encoding (OHE) or Natural Language Processing (NLP). The study found that SMILES inputs with fewer than 200 characters were inadequate for accurately describing compound structures, while inputs exceeding 200 characters diminished model performance due to the curse of dimensionality. The ANN model achieved the highest R2 value of 0.79; however, the XGB model, with an R2 value of 0.774, exhibited the highest stability and shorter training times compared to other models, making it the preferred choice for Tg prediction. The efficiency of the OHE method over NLP was demonstrated by faster training times across the KNN, SVR, XGB, and ANN models. Validation of new polymer data showed the XGB model’s robustness, with an average prediction deviation of 9.76 from actual Tg values. These findings underscore the importance of optimizing SMILES conversion methods and model parameters to enhance prediction reliability. Future research should focus on improving model accuracy and generalizability by incorporating additional features and advanced techniques. This study contributes to the development of efficient and reliable predictive models for polymer properties, facilitating the design and application of new polymer materials.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Metallurgical and Materials Engineering, Faculty of Engineering, Universitas Indonesia, Kampus UI Depok, Depok 16424, Indonesia.
- Advanced Functional Material Research Group, Faculty of Engineering, Universitas Indonesia, Kampus UI Depok, Depok 16424, Indonesia.
- Faculty of Applied Sciences, Universiti Teknologi MARA, Shah Alam 40450, Malaysia.
- School of Materials and Mineral Resources Engineering, Universiti Sains Malaysia (USM), Nibong Tebal 14300, Malaysia.
ORCID-Profile: Jaka Fajar Fatriansyah, Yossi Andreano, Andreas Federico, Siti Norasmah Surip
Förderung
- Directorate of Research and Development, Universitas Indonesia under Hibah PUTI 2024 (Grant No. NKB-505/UN2.RST/HKP.05.00/2024)".
- Directorate of Research and Development, Universitas Indonesia
Zitieren
APA
Fatriansyah, J. F., Linuwih, B. D. P., Andreano, Y., Sari, I. S., Federico, A., Anis, M., Surip, S. N., & Jaafar, M. (2024). Prediction of Glass Transition Temperature of Polymers Using Simple Machine Learning. Polymers, 16(17), 2464. https://doi.org/10.3390/polym16172464
Vancouver
Fatriansyah JF, Linuwih BDP, Andreano Y, Sari IS, Federico A, Anis M, et al. Prediction of Glass Transition Temperature of Polymers Using Simple Machine Learning. Polymers. 2024;16(17):2464. doi:10.3390/polym16172464
BibTeX
@article{Fatriansyah2024,
author = {Fatriansyah, Jaka Fajar and Linuwih, Baiq Diffa Pakarti and Andreano, Yossi and Sari, Intan Septia and Federico, Andreas and Anis, Muhammad and Surip, Siti Norasmah and Jaafar, Mariatti},
title = {Prediction of Glass Transition Temperature of Polymers Using Simple Machine Learning},
journal = {Polymers},
year = {2024},
volume = {16},
number = {17},
pages = {2464},
doi = {10.3390/polym16172464}
}
EUVIMED