EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Polymer Matrix Nanocomposites Fabricated with Copper Nanoparticles and Photopolymer Resin via Vat Photopolymerization Additive Manufacturing

Leon D Gil, Sergio Neves Monteiro iD, Henry A Colorado iD

Polymers · 28.08.2024 · 16 (17) · 2434

DOI: 10.3390/polym16172434 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 28.08.2024. Verfasst von Leon D Gil und 2 weiteren Autor:innen. Beteiligte Einrichtung: CCComposites Laboratory, University of Antioquia, Calle 67 No. 53-108, Medellín 050010, Colombia. Die Arbeit wurde bisher 17-mal zitiert (Crossref) und nennt 54 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This investigation explores the fabrication of polymer matrix nanocomposites via additive manufacturing (AM), using a UV photopolymerization resin and copper nanoparticles (Cu-NPs) with vat photopolymerization 3D printing technology. The aim in this study is to investigate the mentioned materials in different formulations in terms of inexpensive processing, the property related variability, and targeting multifunctional applications. After the AM process, samples were post-cured with UV light in order to obtain better mechanical properties. The particles and resin were mixed using an ultrasonicator, and the particle contents used were 0.0, 0.5, and 1.0 wt %. The process used in this investigation was simple and inexpensive, as the technologies used are quite accessible, from the 3D printer to the UV curing device. These formulations were characterized with scanning electron microscopy (SEM) to observe the materials’ microstructure and tensile tests to quantify stress–strain derived properties. Results showed that, besides the simplicity of the process, the mixing was effective, which was observed in the scanning electron microscope. Additionally, the tensile strength was increased with the UV irradiation exposure, while the strain properties did not change significantly.

Schlagwörter

Stichwörter der Autor:innen

coppernanocompositesnanoparticlesparticle-reinforcementvat photopolymerization

Autor:innen und Institutionen

  • CCComposites Laboratory, University of Antioquia, Calle 67 No. 53-108, Medellín 050010, Colombia.
  • Military Institute of Engineering, IME, Praça General Tibúrcio 80, Urca, Rio de Janeiro 22290-270, RJ, Brazil.

ORCID-Profile: Sergio Neves Monteiro, Henry A Colorado

Zitieren

APA

Gil, L. D., Monteiro, S. N., & Colorado, H. A. (2024). Polymer Matrix Nanocomposites Fabricated with Copper Nanoparticles and Photopolymer Resin via Vat Photopolymerization Additive Manufacturing. Polymers, 16(17), 2434. https://doi.org/10.3390/polym16172434

Vancouver

Gil LD, Monteiro SN, Colorado HA. Polymer Matrix Nanocomposites Fabricated with Copper Nanoparticles and Photopolymer Resin via Vat Photopolymerization Additive Manufacturing. Polymers. 2024;16(17):2434. doi:10.3390/polym16172434

BibTeX
@article{Gil2024,
  author = {Gil, Leon D and Monteiro, Sergio Neves and Colorado, Henry A},
  title = {Polymer Matrix Nanocomposites Fabricated with Copper Nanoparticles and Photopolymer Resin via Vat Photopolymerization Additive Manufacturing},
  journal = {Polymers},
  year = {2024},
  volume = {16},
  number = {17},
  pages = {2434},
  doi = {10.3390/polym16172434}
}
Kostenlos starten →