Investigations of the Laser Ablation Mechanism of PMMA Microchannels Using Single-Pass and Multi-Pass Laser Scans
Polymers · 21.08.2024 · 16 (16) · 2361
DOI: 10.3390/polym16162361 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 21.08.2024. Verfasst von Xiao Li und 8 weiteren Autor:innen. Beteiligte Einrichtung: Zhejiang Provincial Key Laboratory of Laser Processing Robotics, College of Mechanical and Electrical Engineering, Wenzhou University, Wenzhou 325035…. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Major Industrial Technology Projects of Wenzhou, Key Research and Development Program of Zhejiang Province, Major scientific and technological innovation projects of Wenzhou.
Abstract (Originalsprache)
CO2 laser machining is a cost effective and time saving solution for fabricating microchannels on polymethylmethacrylate (PMMA). Due to the lack of research on the incubation effect and ablation behavior of PMMA under high-power laser irradiation, predictions of the microchannel profile are limited. In this study, the ablation process and mechanism of a continuous CO2 laser machining process on microchannel production in PMMA in single-pass and multi-pass laser scan modes are investigated. It is found that a higher laser energy density of a single pass causes a lower ablation threshold. The ablated surface can be divided into three regions: the ablation zone, the incubation zone, and the virgin zone. The PMMA ablation process is mainly attributed to the thermal decomposition reactions and the splashing of molten polymer. The depth, width, aspect ratio, volume ablation rate, and mass ablation rate of the channel increase as the laser scanning speed decreases and the number of laser scans increases. The differences in ablation results obtained under the same total laser energy density using different scan modes are attributed to the incubation effect, which is caused by the thermal deposition of laser energy in the polymer. Finally, an optimized simulation model that is used to solve the problem of a channel width greater than spot diameter is proposed. The error percentage between the experimental and simulation results varies from 0.44% to 5.9%.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Zhejiang Provincial Key Laboratory of Laser Processing Robotics, College of Mechanical and Electrical Engineering, Wenzhou University, Wenzhou 325035, China.
- China International Science & Technology Cooperation Base for Laser Processing Robotics, Wenzhou University, Wenzhou 325035, China.
- Institute of Laser and Optoelectronic Intelligent Manufacturing, Wenzhou University, Wenzhou 325035, China.
- Oujiang Laboratory, Zhejiang Laboratory for Regenerative Medicine, Vision and Brain Health, Wenzhou 325035, China.
- Wenzhou Key Laboratory of Ultrafast Laser Precision Manufacturing Technology, Wenzhou 325035, China.
- College of Mechanical and Electrical Engineering, Wenzhou University, Wenzhou 325035, China.
ORCID-Profile: Fengping Li, Dehua Zhu, Kunpeng Zhang, Bing Han
Förderung
- Major Industrial Technology Projects of Wenzhou
- Key Research and Development Program of Zhejiang Province
- Major scientific and technological innovation projects of Wenzhou
- National Natural Science Foundation of China
Zitieren
APA
Li, X., Tang, R., Li, D., Li, F., Chen, L., Zhu, D., Feng, G., Zhang, K., & Han, B. (2024). Investigations of the Laser Ablation Mechanism of PMMA Microchannels Using Single-Pass and Multi-Pass Laser Scans. Polymers, 16(16), 2361. https://doi.org/10.3390/polym16162361
Vancouver
Li X, Tang R, Li D, Li F, Chen L, Zhu D, et al. Investigations of the Laser Ablation Mechanism of PMMA Microchannels Using Single-Pass and Multi-Pass Laser Scans. Polymers. 2024;16(16):2361. doi:10.3390/polym16162361
BibTeX
@article{Li2024,
author = {Li, Xiao and Tang, Rujun and Li, Ding and Li, Fengping and Chen, Leiqing and Zhu, Dehua and Feng, Guang and Zhang, Kunpeng and Han, Bing},
title = {Investigations of the Laser Ablation Mechanism of PMMA Microchannels Using Single-Pass and Multi-Pass Laser Scans},
journal = {Polymers},
year = {2024},
volume = {16},
number = {16},
pages = {2361},
doi = {10.3390/polym16162361}
}
EUVIMED