Facile Fabrication of Hierarchical Structured Anodic Aluminum Oxide Molds for Large-Scale Production of Superhydrophobic Polymer Films
Polymers · 19.08.2024 · 16 (16) · 2344
DOI: 10.3390/polym16162344 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 19.08.2024. Verfasst von Athinarayanan Balasankar und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Physics, Gobi Arts and Science College, Gobichettipalayam 638453, India. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Korean Ministry of Science, Korean Ministry of Science, ICT, and Future Planning.
Abstract (Originalsprache)
Anodized aluminum oxide (AAO) molds were used for the production of large-area and inexpensive superhydrophobic polymer films. A controlled anodization methodology was developed for the fabrication of hierarchical micro–nanoporous (HMN) AAO imprint molds (HMN-AAO), where phosphoric acid was used as both an electrolyte and a widening agent. Heat generated upon repetitive high-voltage (195 V) anodization steps is effectively dissipated by establishing a cooling channel. On the HMN-AAO, within the hemispherical micropores, arrays of hexagonal nanopores are formed. The diameter and depth of the micro- and nanopores are 18/8 and 0.3/1.25 µm, respectively. The gradual removal of micropatterns during etching in both the vertical and horizontal directions is crucial for fabricating HMN-AAO with a high aspect ratio. HMN-AAO rendered polycarbonate (PC) and polymethyl methacrylate (PMMA) films with respective water contact angles (WCAs) of 153° and 151°, respectively. The increase in the WCA is 80% for PC (85°) and 89% for PMMA (80°). On the PC and PMMA films, mechanically robust arrays of nanopillars are observed within the hemispherical micropillars. The micro–nanopillars on these polymer films are mechanically robust and durable. Regular nanoporous AAO molds resulted in only a hydrophobic polymer film (WCA = 113–118°). Collectively, the phosphoric acid-based controlled anodization strategy can be effectively utilized for the manufacturing of HMN-AAO molds and roll-to-roll production of durable superhydrophobic surfaces.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Physics, Gobi Arts and Science College, Gobichettipalayam 638453, India.
- Nano-Hybrid Technology Research Center, Korea Electrotechnology Research Institute, 9 Beon-gil, 12 Bulmosan-gil, Seongsan-gu, Changwon 51543, Republic of Korea.
- School of Chemical Engineering, Yeungnam University, 280 Daehak-Ro, Gyeongsan 38541, Republic of Korea.
- Nanoeco. Co., Ltd., Technology Start-up Center, Seongju-dong, 10 Jeongiyigil, Seongsan-ku, Changwon 50062, Republic of Korea.
- Institute of Biochemical Technology and Nanotechnology, Peoples' Friendship University of Russia n.a. P. Lumumba (RUDN), 6 Miklukho-Maklaya St., 117198 Moscow, Russia.
ORCID-Profile: Athinarayanan Balasankar, Raja Venkatesan, Tae Hwan Oh, Alexandre A Vetcher
Förderung
- Korean Ministry of Science
- Korean Ministry of Science, ICT, and Future Planning
Zitieren
APA
Balasankar, A., Venkatesan, R., Jeong, D. Y., Oh, T. H., Kim, S. C., Vetcher, A. A., & Ramasundaram, S. (2024). Facile Fabrication of Hierarchical Structured Anodic Aluminum Oxide Molds for Large-Scale Production of Superhydrophobic Polymer Films. Polymers, 16(16), 2344. https://doi.org/10.3390/polym16162344
Vancouver
Balasankar A, Venkatesan R, Jeong DY, Oh TH, Kim SC, Vetcher AA, et al. Facile Fabrication of Hierarchical Structured Anodic Aluminum Oxide Molds for Large-Scale Production of Superhydrophobic Polymer Films. Polymers. 2024;16(16):2344. doi:10.3390/polym16162344
BibTeX
@article{Balasankar2024,
author = {Balasankar, Athinarayanan and Venkatesan, Raja and Jeong, Dae-Yeong and Oh, Tae Hwan and Kim, Seong-Cheol and Vetcher, Alexandre A and Ramasundaram, Subramaniyan},
title = {Facile Fabrication of Hierarchical Structured Anodic Aluminum Oxide Molds for Large-Scale Production of Superhydrophobic Polymer Films},
journal = {Polymers},
year = {2024},
volume = {16},
number = {16},
pages = {2344},
doi = {10.3390/polym16162344}
}
EUVIMED