EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Improving the Tribological Performance of POM through the Incorporation of Bio-Based Materials

Lucas M Kneissl iD, Roberts Joffe iD, Mitjan Kalin iD, Nazanin Emami iD

Polymers · 15.08.2024 · 16 (16) · 2310

DOI: 10.3390/polym16162310 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 15.08.2024. Verfasst von Lucas M Kneissl und 3 weiteren Autor:innen. Beteiligte Einrichtung: Polymer-Tribology Group, Division of Machine Elements, Department of Engineering Sciences and Mathematics, Luleå University of Technology, Campus Por…. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 49 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Horizon 2020 Marie Sklodowska-Curie Action GreenTRIBOS, Horizon 2020 Marie Skłodowska-Curie Action GreenTRIBOS.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Polyoxymethylene (POM), an engineering polymer commonly used in tribological applications, is often reinforced with fossil-based fibers such as carbon and/or glass fibers to improve its properties. To find more sustainable solutions, in this study, the tribological performance of POM/short cellulose fiber composites at different sliding conditions is investigated. An improvement in the wear coefficient of roughly 69% is observed at the harshest conditions of 5 MPa and 1 m · s−1 with only 10 wt.% cellulose fibers. The friction behavior is furthermore stabilized through fiber addition, as the unfilled polymer did not show a steady state. No signs of thermo-oxidative degradation are found after tribological testing. This study presents promising results for sustainable wear-resistant polymer materials in tribological applications.

Schlagwörter

Stichwörter der Autor:innen

cellulose fiberspolymer compositespolyoxymethylenetribologywear resistance

Autor:innen und Institutionen

  • Polymer-Tribology Group, Division of Machine Elements, Department of Engineering Sciences and Mathematics, Luleå University of Technology, Campus Porsön, 971 87 Luleå, Sweden.
  • Laboratory for Tribology and Interface Nanotechnology, Faculty of Mechanical Engineering, University of Ljubljana, Bogišićeva 8, 1000 Ljubljana, Slovenia.
  • Polymeric Composite Materials, Division of Materials Science, Department of Engineering Sciences and Mathematics, Luleå University of Technology, Campus Porsön, 971 87 Luleå, Sweden.

ORCID-Profile: Lucas M Kneissl, Roberts Joffe, Mitjan Kalin, Nazanin Emami

Förderung

  • Horizon 2020 Marie Sklodowska-Curie Action GreenTRIBOS
  • Horizon 2020 Marie Skłodowska-Curie Action GreenTRIBOS

Zitieren

APA

Kneissl, L. M., Joffe, R., Kalin, M., & Emami, N. (2024). Improving the Tribological Performance of POM through the Incorporation of Bio-Based Materials. Polymers, 16(16), 2310. https://doi.org/10.3390/polym16162310

Vancouver

Kneissl LM, Joffe R, Kalin M, Emami N. Improving the Tribological Performance of POM through the Incorporation of Bio-Based Materials. Polymers. 2024;16(16):2310. doi:10.3390/polym16162310

BibTeX
@article{Kneissl2024,
  author = {Kneissl, Lucas M and Joffe, Roberts and Kalin, Mitjan and Emami, Nazanin},
  title = {Improving the Tribological Performance of POM through the Incorporation of Bio-Based Materials},
  journal = {Polymers},
  year = {2024},
  volume = {16},
  number = {16},
  pages = {2310},
  doi = {10.3390/polym16162310}
}
Kostenlos starten →