Influence of Gamma-Phase Aluminum Oxide Nanopowder and Polyester–Glass Recyclate Filler on the Destruction Process of Composite Materials Reinforced by Glass Fiber
Polymers · 10.08.2024 · 16 (16) · 2276
DOI: 10.3390/polym16162276 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 10.08.2024. Verfasst von Katarzyna Panasiuk und 3 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Marine Engineering, Gdynia Maritime University, 81-225 Gdynia, Poland. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 49 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Recycling of composite materials is an important global issue due to the wide use of these materials in many industries. Waste management options are being explored. Mechanical recycling is one of the methods that allows obtaining polyester–glass recyclate in powder form as a result of appropriate crushing and grinding of waste. Due to the fact that the properties of composites can be easily modified by adding various types of fillers and nanofillers, this is one of the ways to improve the properties of such complex composite materials. This article presents the strength parameters of composites with the addition of fillers in the form of polyester–glass recyclate and a nanofiller in the form of gamma-phase aluminum nanopowder. To analyze the obtained results, Kolmogorov-Sinai (K-S) metric entropy was used to determine the transition from the elastic to the viscoelastic state in materials without and with the addition of nanoaluminum, during a static tensile test. The tests included samples with the addition of fillers and nanofillers, as well as a base sample without any additives. The article presents the strength parameters obtained from a testing machine during a static tensile test. Additionally, the acoustic emission method was used during the research. Thanks to which, graphs of the effective value of the electrical signal (RMS) were prepared as a function of time, the parameters were previously identified as extremely useful for analyzing the destruction process of composite materials. The values obtained from the K-S metric entropy method and the acoustic emission method were plotted on sample stretching graphs. The influence of the nanofiller and filler on these parameters was also analyzed. The presented results showed that the aluminum nanoadditive did not increase the strength parameters of the composite with recyclate as a result of the addition of aluminum nanofiller; however, its addition influenced the operational parameters, which is reflected in a 5% increase in the UTS value (from 55% to 60%).
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Faculty of Marine Engineering, Gdynia Maritime University, 81-225 Gdynia, Poland.
ORCID-Profile: Katarzyna Panasiuk, Krzysztof Dudzik, Grzegorz Hajdukiewicz, Norbert Abramczyk
Zitieren
APA
Panasiuk, K., Dudzik, K., Hajdukiewicz, G., & Abramczyk, N. (2024). Influence of Gamma-Phase Aluminum Oxide Nanopowder and Polyester–Glass Recyclate Filler on the Destruction Process of Composite Materials Reinforced by Glass Fiber. Polymers, 16(16), 2276. https://doi.org/10.3390/polym16162276
Vancouver
Panasiuk K, Dudzik K, Hajdukiewicz G, Abramczyk N. Influence of Gamma-Phase Aluminum Oxide Nanopowder and Polyester–Glass Recyclate Filler on the Destruction Process of Composite Materials Reinforced by Glass Fiber. Polymers. 2024;16(16):2276. doi:10.3390/polym16162276
BibTeX
@article{Panasiuk2024,
author = {Panasiuk, Katarzyna and Dudzik, Krzysztof and Hajdukiewicz, Grzegorz and Abramczyk, Norbert},
title = {Influence of Gamma-Phase Aluminum Oxide Nanopowder and Polyester–Glass Recyclate Filler on the Destruction Process of Composite Materials Reinforced by Glass Fiber},
journal = {Polymers},
year = {2024},
volume = {16},
number = {16},
pages = {2276},
doi = {10.3390/polym16162276}
}
EUVIMED