EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Study on Bonding Characteristics of Polymer Grouted Concrete-Soil Interface

Lina Wang, Xiaodong Yang iD, Yueliang Diao, Chengchao Guo

Polymers · 02.08.2024 · 16 (15) · 2207

DOI: 10.3390/polym16152207 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 02.08.2024. Verfasst von Lina Wang und 3 weiteren Autor:innen. Beteiligte Einrichtung: School of Water Conservancy and Transportation, Zhengzhou University, Zhengzhou 450001, China. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key R&D Program of China, Program for Guangdong Introducing Innovative and Enterpreneurial Teams, National Key R&D Program of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The issue of interfacial shear damage has been a significant challenge in the field of geotechnical engineering, particularly in the context of diaphragm walls and surrounding soils. Polymer grouting is a more commonly used repair and reinforcement method but its application to interface repair and reinforcement in the field of geotechnical engineering is still relatively rare. Consequently, this paper presents a new polymer grouting material for use in grouting reinforcement at the interface between concrete and soils. The bonding characteristics and shear damage mode of the interface after grouting were investigated by the direct shear test, and the whole process of interface shear damage was investigated by digital image correlation (DIC) technology. Finally, the reinforcement mechanism was analyzed by microscopic analysis. The results demonstrate that the permeable polymer is capable of effectively filling the pores of soil particles and penetrating into the concrete-soil interface. Through a chemical reaction with water in the soil, the polymer cements the soil particles together, forming chemical adhesion at the interface and thereby achieving the desired reinforcement and repair effect. In the shear process, as the normal stress increased, the horizontal displacement and horizontal compressive strain at the distal end of the loading end decreased, while the maximum vertical displacement and maximum vertical strain of the cured soil also decreased. The results of scanning electron microscopy (SEM) demonstrated that the four groups of test polymers exhibited a reduction in soil porosity of 53.47%, 58.79%, 52.71%, and 54.12%, respectively. Additionally, the form of concrete-soil interfacial bonding was observed in the concrete-cohesive layer-cured soil mode. The findings of this study provide a foundation for further research on diaphragm wall repair and reinforcement.

Schlagwörter

Stichwörter der Autor:innen

diaphragm walldirect shear testinterfacial groutingmicrostructurepermeable polymer

Autor:innen und Institutionen

  • School of Water Conservancy and Transportation, Zhengzhou University, Zhengzhou 450001, China.
  • Hefei Commumications Investment Hetong Expressway Co., Ltd., Hefei 231200, China.
  • School of Civil Engineering, Sun Yat-sen University, Guangzhou 510275, China.

ORCID-Profile: Xiaodong Yang

Förderung

  • National Key R&D Program of China
  • Program for Guangdong Introducing Innovative and Enterpreneurial Teams
  • National Key R&D Program of China
  • Program for Guangdong Introducing Innovative and Entrepreneurial Teams

Zitieren

APA

Wang, L., Yang, X., Diao, Y., & Guo, C. (2024). Study on Bonding Characteristics of Polymer Grouted Concrete-Soil Interface. Polymers, 16(15), 2207. https://doi.org/10.3390/polym16152207

Vancouver

Wang L, Yang X, Diao Y, Guo C. Study on Bonding Characteristics of Polymer Grouted Concrete-Soil Interface. Polymers. 2024;16(15):2207. doi:10.3390/polym16152207

BibTeX
@article{Wang2024,
  author = {Wang, Lina and Yang, Xiaodong and Diao, Yueliang and Guo, Chengchao},
  title = {Study on Bonding Characteristics of Polymer Grouted Concrete-Soil Interface},
  journal = {Polymers},
  year = {2024},
  volume = {16},
  number = {15},
  pages = {2207},
  doi = {10.3390/polym16152207}
}
Kostenlos starten →