Molecular Dynamics Simulation of Hydrogen Barrier Performance of Modified Polyamide 6 Lining of IV Hydrogen Storage Tank with Graphene
Polymers · 31.07.2024 · 16 (15) · 2185
DOI: 10.3390/polym16152185 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 31.07.2024. Verfasst von Jin Li und 6 weiteren Autor:innen. Beteiligte Einrichtung: College of Mechanical Engineering, Taiyuan University of Science and Technology, Taiyuan 033024, China. Die Arbeit wurde bisher 20-mal zitiert (Crossref) und nennt 53 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Shanxi Province Major Science and Technology Project, Key Research and Development Projects in Shanxi Province.
Abstract (Originalsprache)
The polymer liner of the hydrogen storage cylinder was studied to investigate better hydrogen storage capacity in Type-IV cylinders. Molecular dynamics methods were used to simulate the adsorption and diffusion processes of hydrogen in a graphene-filled polyamide 6 (PA6) system. The solubility and diffusion characteristics of hydrogen in PA6 systems filled with different filler ratios (3 wt%, 4 wt%, 5 wt%, 6 wt%, and 7 wt%) were studied under working pressures (0.1 MPa, 35 MPa, 52 MPa, and 70 MPa). The effects of filler ratio, temperature, and pressure on hydrogen diffusion were analyzed. The results show that at atmospheric pressure when the graphene content reaches 5 wt%, its permeability coefficient is as low as 2.44 × 10−13 cm3·cm/(cm2·s·Pa), which is a 54.6% reduction compared to PA6. At 358 K and 70 MPa, the diffusion coefficient of the 5 wt% graphene/PA6 composite system is 138% higher than that at 298 K and 70 MPa. With increasing pressure, the diffusion coefficients of all materials generally decrease linearly. Among them, pure PA6 has the largest diffusion coefficient, while the 4 wt% graphene/PA6 composite system has the smallest diffusion coefficient. Additionally, the impact of FFV (free volume fraction) on the barrier properties of the material was studied, and the movement trajectory of H2 in the composite system was analyzed.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- College of Mechanical Engineering, Taiyuan University of Science and Technology, Taiyuan 033024, China.
- Department of Resource and Mechanical Engineering, Lyuliang University, Lvliang 033001, China.
- College of Mechanical and Vehicle Engineering, Taiyuan University of Technology, Taiyuan 030024, China.
- College of Intelligent Manufacturing Industry, Shanxi University of Electronic Science and Technology, Linfen 041000, China.
Förderung
- National Natural Science Foundation of China
- Shanxi Province Major Science and Technology Project
- Key Research and Development Projects in Shanxi Province
- Startup Fund for Talent Introduction of Shanxi Electronic Science and Technology Institute
- Key Research Project of School-Land Cooperation in Lvliang City
Zitieren
APA
Li, J., Zhao, X., Liang, J., Zhao, C., Feng, N., Guo, G., & Zhou, Z. (2024). Molecular Dynamics Simulation of Hydrogen Barrier Performance of Modified Polyamide 6 Lining of IV Hydrogen Storage Tank with Graphene. Polymers, 16(15), 2185. https://doi.org/10.3390/polym16152185
Vancouver
Li J, Zhao X, Liang J, Zhao C, Feng N, Guo G, et al. Molecular Dynamics Simulation of Hydrogen Barrier Performance of Modified Polyamide 6 Lining of IV Hydrogen Storage Tank with Graphene. Polymers. 2024;16(15):2185. doi:10.3390/polym16152185
BibTeX
@article{Li2024,
author = {Li, Jin and Zhao, Xiaokou and Liang, Jianguo and Zhao, Chunjiang and Feng, Ning and Guo, Guanyu and Zhou, Zhengze},
title = {Molecular Dynamics Simulation of Hydrogen Barrier Performance of Modified Polyamide 6 Lining of IV Hydrogen Storage Tank with Graphene},
journal = {Polymers},
year = {2024},
volume = {16},
number = {15},
pages = {2185},
doi = {10.3390/polym16152185}
}
EUVIMED