The Effect of Polyethylene Glycol on the Non-Isothermal Crystallization of Poly(L-lactide) and Poly(D-lactide) Blends
Polymers · 26.07.2024 · 16 (15) · 2129
DOI: 10.3390/polym16152129 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 26.07.2024. Verfasst von Panthima Phuangthong und 5 weiteren Autor:innen. Beteiligte Einrichtung: Manufacturing and Materials Research Unit, Department of Manufacturing Engineering, Faculty of Engineering, Mahasarakham University, Mahasarakham 441…. Die Arbeit wurde bisher 18-mal zitiert (Crossref) und nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Mahasarakham University.
Abstract (Originalsprache)
The formation of polylactide stereocomplex (sc-PLA), involving the blending of poly(L-lactide) (PLLA) and poly(D-lactide) (PDLA), enhances PLA materials by making them stronger and more heat-resistant. This study investigated the competitive crystallization behavior of homocrystals (HCs) and stereocomplex crystals (SCs) in a 50/50 PLLA/PDLA blend with added polyethylene glycol (PEG). PEG, with molecular weights of 400 g/mol and 35,000 g/mol, was incorporated at concentrations ranging from 5% to 20% by weight. Differential scanning calorimetry (DSC) analysis revealed that PEG increased the crystallization temperature, promoted SC formation, and inhibited HC formation. PEG also acted as a plasticizer, lowering both melting and crystallization temperatures. The second heating DSC curve showed that the pure PLLA/PDLA blend had a 57.1% fraction of SC while adding 5% PEG with a molecular weight of 400 g/mol resulted in complete SC formation. In contrast, PEG with a molecular weight of 35,000 g/mol was less effective, allowing some HC formation. Additionally, PEG consistently promoted SC formation across various cooling rates (2, 5, 10, or 20 °C/min), demonstrating a robust influence under different conditions.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Manufacturing and Materials Research Unit, Department of Manufacturing Engineering, Faculty of Engineering, Mahasarakham University, Mahasarakham 44150, Thailand.
- College of Mechanical Engineering, Hunan Mechanical & Electrical Polytechnic, Changsha 410151, China.
- Sustainable & Green Plastics Laboratory, Metallurgical & Materials Engineering Department, Faculty of Chemical and Metallurgical Engineering, Istanbul Technical University, Istanbul 34469, Turkey.
- Department of Chemistry, Faculty of Science, Chiang Mai University, Chiang Mai 50200, Thailand.
- Center of Excellence for Innovation in Chemistry (PERCH-CIC), Faculty of Science, Chiang Mai University, Chiang Mai 50200, Thailand.
- Center of Excellence in Materials Science and Technology, Chiang Mai University, Chiang Mai 50200, Thailand.
ORCID-Profile: Mohammadreza Nofar, Patnarin Worajittiphon, Yottha Srithep
Förderung
- Mahasarakham University
Zitieren
APA
Phuangthong, P., Li, W., Shen, J., Nofar, M., Worajittiphon, P., & Srithep, Y. (2024). The Effect of Polyethylene Glycol on the Non-Isothermal Crystallization of Poly(L-lactide) and Poly(D-lactide) Blends. Polymers, 16(15), 2129. https://doi.org/10.3390/polym16152129
Vancouver
Phuangthong P, Li W, Shen J, Nofar M, Worajittiphon P, Srithep Y. The Effect of Polyethylene Glycol on the Non-Isothermal Crystallization of Poly(L-lactide) and Poly(D-lactide) Blends. Polymers. 2024;16(15):2129. doi:10.3390/polym16152129
BibTeX
@article{Phuangthong2024,
author = {Phuangthong, Panthima and Li, Wenwei and Shen, Jun and Nofar, Mohammadreza and Worajittiphon, Patnarin and Srithep, Yottha},
title = {The Effect of Polyethylene Glycol on the Non-Isothermal Crystallization of Poly(L-lactide) and Poly(D-lactide) Blends},
journal = {Polymers},
year = {2024},
volume = {16},
number = {15},
pages = {2129},
doi = {10.3390/polym16152129}
}
EUVIMED