Environmental Impact of Fused Filament Fabrication: What Is Known from Life Cycle Assessment?
Polymers · 11.07.2024 · 16 (14) · 1986
DOI: 10.3390/polym16141986 ↗Kurz gefasst
Übersichtsarbeit in der Zeitschrift Polymers, online erschienen am 11.07.2024. Verfasst von Antonella Sola und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Sciences and Methods for Engineering (DISMI), University of Modena and Reggio Emilia, Via G. Amendola 2, 42122 Reggio Emilia, Italy. Die Arbeit wurde bisher 36-mal zitiert (Crossref) und nennt 124 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This systematic review interrogates the literature to understand what is known about the environmental sustainability of fused filament fabrication, FFF (also known as fused deposition modeling, FDM), based on life cycle assessment (LCA) results. Since substantial energy demand is systematically addressed as one of the main reasons for ecological damage in FFF, mitigation strategies are often based on reducing the printing time (for example, adopting thicker layers) or the embodied energy per part (e.g., by nesting, which means by printing multiple parts in the same job). A key parameter is the infill degree, which can be adjusted to the application requirements while saving printing time/energy and feedstock material. The adoption of electricity from renewable resources is also expected to boost the sustainability of distributed manufacturing through FFF. Meanwhile, bio-based and recycled materials are being investigated as less impactful alternatives to conventional fossil fuel-based thermoplastic filaments.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Sciences and Methods for Engineering (DISMI), University of Modena and Reggio Emilia, Via G. Amendola 2, 42122 Reggio Emilia, Italy.
ORCID-Profile: Antonella Sola, Roberto Rosa, Anna Maria Ferrari
Zitieren
APA
Sola, A., Rosa, R., & Ferrari, A. M. (2024). Environmental Impact of Fused Filament Fabrication: What Is Known from Life Cycle Assessment?. Polymers, 16(14), 1986. https://doi.org/10.3390/polym16141986
Vancouver
Sola A, Rosa R, Ferrari AM. Environmental Impact of Fused Filament Fabrication: What Is Known from Life Cycle Assessment?. Polymers. 2024;16(14):1986. doi:10.3390/polym16141986
BibTeX
@article{Sola2024,
author = {Sola, Antonella and Rosa, Roberto and Ferrari, Anna Maria},
title = {Environmental Impact of Fused Filament Fabrication: What Is Known from Life Cycle Assessment?},
journal = {Polymers},
year = {2024},
volume = {16},
number = {14},
pages = {1986},
doi = {10.3390/polym16141986}
}
EUVIMED