EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Biological and Physicochemical Analysis of Sr-Doped Hydroxyapatite/Chitosan Composite Layers

Maria Elena Zarif iD, Bogdan Bita iD, Sasa Alexandra Yehia-Alexe iD, Irina Negut iD, Gratiela Gradisteanu Pircalabioru, Ecaterina Andronescu iD, Andreea Groza

Polymers · 05.07.2024 · 16 (13) · 1922

DOI: 10.3390/polym16131922 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 05.07.2024. Verfasst von Maria Elena Zarif und 6 weiteren Autor:innen. Beteiligte Einrichtung: National Institute for Lasers, Plasma and Radiation Physics, 077125 Măgurele, Romania. Die Arbeit wurde bisher 15-mal zitiert (Crossref) und nennt 80 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Research, Innovation and Digitization, CNCS/CCCDI - UEFISCDI, Ministry of Research, Innovation and Digitization, CNCS-UEFISCDI, Ministry of Research, Innovation and Digitization.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this work results are presented on the evaluation of HAp, HApSr, HAp_CS, and HApSr_CS layers deposited on Ti substrates regarding L929 cell viability and cytotoxicity as well as antimicrobial activity against Staphylococcus aureus, in connection with their physicochemical properties. The HAp and HApSr layers generated by radio-frequency magnetron sputtering technique were further covered with chitosan by a matrix-assisted pulsed laser evaporation technique. During the plasma depositions, the Ti substrates were heated externally by a home-made oven above 100 °C. The HApSr_CS layers generated on the unpolished Ti substrates at 100 °C and 400 °C showed the highest biocompatibility properties and antimicrobial activity against Staphylococcus aureus. The morphology of the layer surfaces, revealed by scanning electron microscopy, is dependent on substrate temperature and substrate surface roughness. The optically polished surfaces of Ti substrates revealed grain-like and microchannel structure morphologies of the layers deposited at 25 °C substrate temperature and 400 °C, respectively. Chitosan has no major influence on HAp and HApSr layer surface morphologies. X-ray photoelectron spectroscopy indicated the presence of Ca 2p3/2 peak characteristic of the HAp structure even in the case of the HApSr_CS samples generated at a 400 °C substrate temperature. Fourier transform infrared spectroscopy investigations showed shifts in the wavenumber positions of the P-O absorption bands as a function of Sr or chitosan presence in the HAp layers generated at 25, 100, and 400 °C substrate temperatures.

Schlagwörter

Stichwörter der Autor:innen

L929 cell lineLDH assayMTT assayantimicrobial activitychitosanhydroxyapatitematrix assisted pulsed laser evaporation depositionradio-frequency magnetron sputtering depositionstrontium-doped hydroxyapatite“live/dead” cell assay

Autor:innen und Institutionen

  • National Institute for Lasers, Plasma and Radiation Physics, 077125 Măgurele, Romania.
  • Faculty of Chemical Engineering and Biotechnologies, University Politehnica of Bucharest, 011061 Bucharest, Romania.
  • Faculty of Physics, University of Bucharest, 077125 Măgurele, Romania.
  • eBio-Hub Research Center, University Politehnica of Bucharest-CAMPUS, 6 Iuliu Maniu Boulevard, 061344 Bucharest, Romania.
  • Research Institute of the University of Bucharest (ICUB), University of Bucharest, 050657 Bucharest, Romania.
  • Department of Microbiology and Immunology, Faculty of Biology, University of Bucharest, 050657 Bucharest, Romania.

ORCID-Profile: Maria Elena Zarif, Bogdan Bita, Sasa Alexandra Yehia-Alexe, Irina Negut, Ecaterina Andronescu

Förderung

  • Ministry of Research, Innovation and Digitization, CNCS/CCCDI - UEFISCDI
  • Ministry of Research, Innovation and Digitization, CNCS-UEFISCDI
  • Ministry of Research, Innovation and Digitization
  • Ministry of Research, Innovation, and Digitization, CNCS—UEFISCDI

Zitieren

APA

Zarif, M. E., Bita, B., Yehia-Alexe, S. A., Negut, I., Gradisteanu Pircalabioru, G., Andronescu, E., & Groza, A. (2024). Biological and Physicochemical Analysis of Sr-Doped Hydroxyapatite/Chitosan Composite Layers. Polymers, 16(13), 1922. https://doi.org/10.3390/polym16131922

Vancouver

Zarif ME, Bita B, Yehia-Alexe SA, Negut I, Gradisteanu Pircalabioru G, Andronescu E, et al. Biological and Physicochemical Analysis of Sr-Doped Hydroxyapatite/Chitosan Composite Layers. Polymers. 2024;16(13):1922. doi:10.3390/polym16131922

BibTeX
@article{Zarif2024,
  author = {Zarif, Maria Elena and Bita, Bogdan and Yehia-Alexe, Sasa Alexandra and Negut, Irina and Gradisteanu Pircalabioru, Gratiela and Andronescu, Ecaterina and Groza, Andreea},
  title = {Biological and Physicochemical Analysis of Sr-Doped Hydroxyapatite/Chitosan Composite Layers},
  journal = {Polymers},
  year = {2024},
  volume = {16},
  number = {13},
  pages = {1922},
  doi = {10.3390/polym16131922}
}
Kostenlos starten →