EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Modeling, the Optimization of the Composition of Emulgels with Ciclopirox Olamine, and Quality Assessment

Agne Mazurkeviciute, Inga Matulyte iD, Marija Ivaskiene, Modestas Zilius iD

Polymers · 26.06.2024 · 16 (13) · 1816

DOI: 10.3390/polym16131816 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 26.06.2024. Verfasst von Agne Mazurkeviciute und 3 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Pharmaceutical Technologies, Lithuanian University of Health Sciences, 50162 Kaunas, Lithuania. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The design and development of pharmaceutical products require specific knowledge, time, and investment. Response surface methodology (RSM) is a widely used technique in the design of experiments (DoE) to optimize various processes and products. The aim of this study was to model and produce experimental emulgels containing 1% ciclopirox olamine and to evaluate their physical, rheological, and mechanical properties and their ability to release ciclopirox olamine. The objective was to optimize the composition of the experimental emulgel containing 1% ciclopirox olamine by applying a central composite design based on selected criteria. The surfactant (polysorbate 80) had the greatest influence on the physical, rheological, and mechanical properties of the emulgels, as well as on the release of ciclopirox olamine from these systems. During the optimization process, an emulgel of optimal composition was generated containing 38.27% mineral oil, 6.56% polysorbate 80, and 55.17% hydrogel containing 1% ciclopirox olamine, meeting specified criteria (dependent variables) including the maximum flux of ciclopirox olamine, the minimum sol–gel transition temperature (Tsol/gel), and the minimum particle size of the oil phase. The oil phase particle size (D50) of this emulgel was determined to be 0.337 µm, the system Tsol/gel was 9.1 °C, and the flux of ciclopirox olamine from this gel matrix was calculated to be 1.44 mg/cm2. This emulgel of optimal composition could be used to treat fungal skin diseases.

Schlagwörter

Stichwörter der Autor:innen

ciclopirox olaminedesign of experimentsemulgelsmineral oilpoloxamer 407

Autor:innen und Institutionen

  • Institute of Pharmaceutical Technologies, Lithuanian University of Health Sciences, 50162 Kaunas, Lithuania.
  • Department of Clinical Pharmacy, Lithuanian University of Health Sciences, 50162 Kaunas, Lithuania.
  • Department of Drug Technology and Social Pharmacy, Lithuanian University of Health Sciences, 50162 Kaunas, Lithuania.
  • Dr. L. Kraučeliūnas Small Animal Clinic, Veterinary Academy, Lithuanian University of Health Sciences, 47181 Kaunas, Lithuania.

ORCID-Profile: Inga Matulyte, Modestas Zilius

Zitieren

APA

Mazurkeviciute, A., Matulyte, I., Ivaskiene, M., & Zilius, M. (2024). Modeling, the Optimization of the Composition of Emulgels with Ciclopirox Olamine, and Quality Assessment. Polymers, 16(13), 1816. https://doi.org/10.3390/polym16131816

Vancouver

Mazurkeviciute A, Matulyte I, Ivaskiene M, Zilius M. Modeling, the Optimization of the Composition of Emulgels with Ciclopirox Olamine, and Quality Assessment. Polymers. 2024;16(13):1816. doi:10.3390/polym16131816

BibTeX
@article{Mazurkeviciute2024,
  author = {Mazurkeviciute, Agne and Matulyte, Inga and Ivaskiene, Marija and Zilius, Modestas},
  title = {Modeling, the Optimization of the Composition of Emulgels with Ciclopirox Olamine, and Quality Assessment},
  journal = {Polymers},
  year = {2024},
  volume = {16},
  number = {13},
  pages = {1816},
  doi = {10.3390/polym16131816}
}
Kostenlos starten →