EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Investigation of Creep Behavior of HDPE Pipe Butt Fusion Welded Joints Using a Stepped Isostress Method

Chunmei Bai, Rong Lin, Huan Sheng Lai iD

Polymers · 26.06.2024 · 16 (13) · 1803

DOI: 10.3390/polym16131803 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 26.06.2024. Verfasst von Chunmei Bai und 2 weiteren Autor:innen. Beteiligte Einrichtung: Architecture and Civil Engineering Institute, Guangdong University of Petrochemical Technology, Maoming 525000, China. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation Project of China, Natural Science Foundation of Guangdong Province, China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The utilization of high-density polyethylene (HDPE) pipes is prevalent in water transportation due to their exceptional durability, resistance to corrosion, and ease of installation. Traditionally, butt fusion welding has been employed to connect HDPE pipes. In this study, scanning electron microscopy (SEM) was utilized to examine the microstructure of butt fusion welded joints of HDPE pipes, while the stepped isostress method (SSM) was employed to investigate their creep behavior at 100 °C in ambient air. SEM results revealed a significant presence of craze or lamellae in the base material, whereas minimal occurrences of craze or lamellae were observed in the melt zone. The results obtained from the SSM indicated that the creep life of butt fusion welded joints of HDPE pipes was not adversely affected by the welding bead, and their creep life was no less than that of the base material when ductile creep failure occurred.

Schlagwörter

Stichwörter der Autor:innen

HDPEbutt fusion weldingstepped isostress methodwelded joint

Autor:innen und Institutionen

  • Architecture and Civil Engineering Institute, Guangdong University of Petrochemical Technology, Maoming 525000, China.
  • School of Chemical Engineering, Fuzhou University, Fuzhou 350116, China.
  • Sino-French Institute of Nuclear Engineering and Technology, Sun Yat-sen University, Zhuhai 519082, China.

ORCID-Profile: Huan Sheng Lai

Förderung

  • National Natural Science Foundation Project of China
  • Natural Science Foundation of Guangdong Province, China

Zitieren

APA

Bai, C., Lin, R., & Lai, H. S. (2024). Investigation of Creep Behavior of HDPE Pipe Butt Fusion Welded Joints Using a Stepped Isostress Method. Polymers, 16(13), 1803. https://doi.org/10.3390/polym16131803

Vancouver

Bai C, Lin R, Lai HS. Investigation of Creep Behavior of HDPE Pipe Butt Fusion Welded Joints Using a Stepped Isostress Method. Polymers. 2024;16(13):1803. doi:10.3390/polym16131803

BibTeX
@article{Bai2024,
  author = {Bai, Chunmei and Lin, Rong and Lai, Huan Sheng},
  title = {Investigation of Creep Behavior of HDPE Pipe Butt Fusion Welded Joints Using a Stepped Isostress Method},
  journal = {Polymers},
  year = {2024},
  volume = {16},
  number = {13},
  pages = {1803},
  doi = {10.3390/polym16131803}
}
Kostenlos starten →