EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Hemp Fiber-Reinforced Polymers Composite Jacketing Technique for Sustainable and Environment-Friendly Concrete

Panumas Saingam iD, Qudeer Hussain, Gritsada Sua-Iam, Adnan Nawaz iD, Ali Ejaz

Polymers · 23.06.2024 · 16 (13) · 1774

DOI: 10.3390/polym16131774 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 23.06.2024. Verfasst von Panumas Saingam und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Civil Engineering, School of Engineering, King Mongkut's Institute of Technology Ladkrabang, Bangkok 10520, Thailand. Die Arbeit wurde bisher 31-mal zitiert (Crossref) und nennt 49 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: King Mongkut’s Institute of Technology Ladkrabang.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This research suggested natural hemp fiber-reinforced ropes (FRR) polymer usage to reinforce recycled aggregate square concrete columns that contain fired-clay solid brick aggregates in order to reduce the high costs associated with synthetic fiber-reinforced polymers (FRPs). A total of 24 square columns of concrete were fabricated to conduct this study. The samples were tested under a monotonic axial compression load. The variables of interest were the strength of unconfined concrete and the number of FRR layers. According to the results, the strengthened specimens demonstrated an increased compressive strength and ductility. Notably, the specimens with the smallest unconfined strength demonstrated the largest improvement in compressive strength and ductility. Particularly, the compressive strength and strain were enhanced by up to 181% and 564%, respectively. In order to predict the ultimate confined compressive stress and strain, this study investigated a number of analytical stress–strain models. A comparison of experimental and theoretical findings deduced that only a limited number of strength models resulted in close predictions, whereas an even larger scatter was observed for strain prediction. Machine learning was employed by using neural networks to predict the compressive strength. A dataset comprising 142 specimens strengthened with hemp FRP was extracted from the literature. The neural network was trained on the extracted dataset, and its performance was evaluated for the experimental results of this study, which demonstrated a close agreement.

Schlagwörter

Stichwörter der Autor:innen

compressive strengthconcreteconfinementhempneural networksustainable cities and communities

Autor:innen und Institutionen

  • Department of Civil Engineering, School of Engineering, King Mongkut's Institute of Technology Ladkrabang, Bangkok 10520, Thailand.
  • Civil Engineering Department, Kasem Bundit University, Bangkok 10250, Thailand.
  • Department of Civil Engineering, Faculty of Engineering, Rajamangala University of Technology Phra Nakhon (RMUTP), 1381 Pracharat Sai 1 Road, Wong Sawang, Bang Sue, Bangkok 10800, Thailand.
  • Department of Civil Engineering, COMSATS University Islamabad, Wah Campus, Wah Cantt 47040, Pakistan.
  • National Institute of Transportation, National University of Science and Technology, Islamabad 44000, Pakistan.

ORCID-Profile: Panumas Saingam, Adnan Nawaz

Förderung

  • King Mongkut’s Institute of Technology Ladkrabang

Zitieren

APA

Saingam, P., Hussain, Q., Sua-Iam, G., Nawaz, A., & Ejaz, A. (2024). Hemp Fiber-Reinforced Polymers Composite Jacketing Technique for Sustainable and Environment-Friendly Concrete. Polymers, 16(13), 1774. https://doi.org/10.3390/polym16131774

Vancouver

Saingam P, Hussain Q, Sua-Iam G, Nawaz A, Ejaz A. Hemp Fiber-Reinforced Polymers Composite Jacketing Technique for Sustainable and Environment-Friendly Concrete. Polymers. 2024;16(13):1774. doi:10.3390/polym16131774

BibTeX
@article{Saingam2024,
  author = {Saingam, Panumas and Hussain, Qudeer and Sua-Iam, Gritsada and Nawaz, Adnan and Ejaz, Ali},
  title = {Hemp Fiber-Reinforced Polymers Composite Jacketing Technique for Sustainable and Environment-Friendly Concrete},
  journal = {Polymers},
  year = {2024},
  volume = {16},
  number = {13},
  pages = {1774},
  doi = {10.3390/polym16131774}
}
Kostenlos starten →