EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Composite Ionogel Electrodes for Polymeric Solid-State Li-Ion Batteries

Noah B Schorr iD, Austin Bhandarkar, Josefine D McBrayer, A Alec Talin

Polymers · 21.06.2024 · 16 (13) · 1763

DOI: 10.3390/polym16131763 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 21.06.2024. Verfasst von Noah B Schorr und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Power Sources R&D, Sandia National Laboratories, Albuquerque, NM 87123, USA. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Realizing rechargeable cells with practical energy and power density requires electrodes with high active material loading, a remaining challenge for solid-state batteries. Here, we present a new strategy based on ionogel-derived solid-state electrolytes (SSEs) to form composite electrodes that enable high active material loading (>10 mg/cm2, ~9 mA/cm2 at 1C) in a scalable approach for fabricating Li-ion cells. By tuning the precursor and active materials composition incorporated into the composite lithium titanate electrodes, we achieve near-theoretical capacity utilization at C/5 rates and cells capable of stable cycling at 5.85 mA/cm2 (11.70 A/g) with over 99% average Coulombic efficiency at room temperature. Finally, we demonstrate a complete polymeric solid-state cell with a composite anode and a composite lithium iron phosphate cathode with ionogel SSEs, which is capable of stable cycling at a 1C rate.

Schlagwörter

Stichwörter der Autor:innen

Li-ion batteryionogelpolymer electrolytesolid-state electrolyte

Autor:innen und Institutionen

  • Department of Power Sources R&D, Sandia National Laboratories, Albuquerque, NM 87123, USA.
  • Department of Material Physics, Sandia National Laboratories, Livermore, CA 94550, USA.

ORCID-Profile: Noah B Schorr

Zitieren

APA

Schorr, N. B., Bhandarkar, A., McBrayer, J. D., & Talin, A. A. (2024). Composite Ionogel Electrodes for Polymeric Solid-State Li-Ion Batteries. Polymers, 16(13), 1763. https://doi.org/10.3390/polym16131763

Vancouver

Schorr NB, Bhandarkar A, McBrayer JD, Talin AA. Composite Ionogel Electrodes for Polymeric Solid-State Li-Ion Batteries. Polymers. 2024;16(13):1763. doi:10.3390/polym16131763

BibTeX
@article{Schorr2024,
  author = {Schorr, Noah B and Bhandarkar, Austin and McBrayer, Josefine D and Talin, A Alec},
  title = {Composite Ionogel Electrodes for Polymeric Solid-State Li-Ion Batteries},
  journal = {Polymers},
  year = {2024},
  volume = {16},
  number = {13},
  pages = {1763},
  doi = {10.3390/polym16131763}
}
Kostenlos starten →