EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Mechanical Properties and Stress–Strain Relationship of PVA-Fiber-Reinforced Engineered Geopolymer Composite

Jian Zhou, Zhenjun Li, Xi Liu, Xinzhuo Yang, Jiaojiao Lv

Polymers · 13.06.2024 · 16 (12) · 1685

DOI: 10.3390/polym16121685 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 13.06.2024. Verfasst von Jian Zhou und 4 weiteren Autor:innen. Beteiligte Einrichtung: Northwest Engineering Corporation Limited, Xi'an 710065, China. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Fund Project of Science and Technology Department of Shaanxi Province, Fund Project of Power Construction Corporation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, seven Engineering Geopolymer Composite (EGC) groups with varying proportions were prepared. Rheological, compressive, flexural, and axial tensile tests of the EGC were conducted to study the effects of the water/binder ratio, the cement/sand ratio, and fiber type on its properties. Additionally, a uniaxial tension constitutive model was established. The results indicate that the EGC exhibits early strength characteristics, with the 7-day compressive strength reaching 80% to 92% of the 28-day compressive strength. The EGC demonstrates high compressive strength and tensile ductility, achieving up to 70 MPa and 4%, respectively. The mechanical properties of the EGC improved with an increase in the sand/binder ratio and decreased with an increase in the water/binder ratio. The stress–strain curve of the EGC resembles that of the ECC, displaying a strain-hardening state that can be divided into two stages: before cracking, the matrix primarily bears the stress; after cracking, the slope decreases, and the fiber predominantly bears the stress.

Schlagwörter

Stichwörter der Autor:innen

engineering geopolymer compositefractal dimensionmechanical propertypolyvinyl alcohol fiberstress–strain constitutive modeluniaxial tensile behaviors

Autor:innen und Institutionen

  • Northwest Engineering Corporation Limited, Xi'an 710065, China.
  • School of Civil Engineering, Chang'an University, Xi'an 710064, China.

Förderung

  • Fund Project of Science and Technology Department of Shaanxi Province
  • Fund Project of Power Construction Corporation of China

Zitieren

APA

Zhou, J., Li, Z., Liu, X., Yang, X., & Lv, J. (2024). Mechanical Properties and Stress–Strain Relationship of PVA-Fiber-Reinforced Engineered Geopolymer Composite. Polymers, 16(12), 1685. https://doi.org/10.3390/polym16121685

Vancouver

Zhou J, Li Z, Liu X, Yang X, Lv J. Mechanical Properties and Stress–Strain Relationship of PVA-Fiber-Reinforced Engineered Geopolymer Composite. Polymers. 2024;16(12):1685. doi:10.3390/polym16121685

BibTeX
@article{Zhou2024,
  author = {Zhou, Jian and Li, Zhenjun and Liu, Xi and Yang, Xinzhuo and Lv, Jiaojiao},
  title = {Mechanical Properties and Stress–Strain Relationship of PVA-Fiber-Reinforced Engineered Geopolymer Composite},
  journal = {Polymers},
  year = {2024},
  volume = {16},
  number = {12},
  pages = {1685},
  doi = {10.3390/polym16121685}
}
Kostenlos starten →