EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Fabrication of k-Carrageenan/Alginate/Carboxymethyl Cellulose basedScaffolds via 3D Printing for Potential Biomedical Applications

Cristina Stavarache, Adi Ghebaur, Andrada Serafim iD, George Mihail Vlăsceanu iD, Eugeniu Vasile, Sorina Alexandra Gârea, Horia Iovu

Polymers · 04.06.2024 · 16 (11) · 1592

DOI: 10.3390/polym16111592 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 04.06.2024. Verfasst von Cristina Stavarache und 6 weiteren Autor:innen. Beteiligte Einrichtung: Advanced Polymer Materials Group, National Polytechnic University of Science and Technology Bucharest, 1-7 Gh. Polizu Street, 011061 Bucharest, Roman…. Die Arbeit wurde bisher 18-mal zitiert (Crossref) und nennt 85 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National University for Science and Technology Politehnica București.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Three-dimensional (3D) printing technology was able to generate great attention because of its unique methodology and for its major potential to manufacture detailed and customizable scaffolds in terms of size, shape and pore structure in fields like medicine, pharmaceutics and food. This study aims to fabricate an ink entirely composed of natural polymers, alginate, k-carrageenan and carboxymethyl cellulose (AkCMC). Extrusion-based 3D printing was used to obtain scaffolds based on a crosslinked interpenetrating polymer network from the alginate, k-carrageenan, carboxymethyl cellulose and glutaraldehide formulation using CaCl2, KCl and glutaraldehyde in various concentrations of acetic acid. The stabile bonding of the crosslinked scaffolds was assessed using infrared spectroscopy (FT-IR) as well as swelling, degradation and mechanical investigations. Moreover, morphology analysis (µCT and SEM) confirmed the 3D printed samples’ porous structure. In the AkCMC-GA objects crosslinked with the biggest acetic acid concentration, the values of pores and walls are the highest, at 3.9 × 10−2 µm−1. Additionally, this research proves the encapsulation of vitamin B1 via FT-IR and UV-Vis spectroscopy. The highest encapsulation efficiency of vitamin B1 was registered for the AkCMC-GA samples crosslinked with the maximum acetic acid concentration. The kinetic release of the vitamin was evaluated by UV-Vis spectroscopy. Based on the results of these experiments, 3D printed constructs using AkCMC-GA ink could be used for soft tissue engineering applications and also for vitamin B1 encapsulation.

Schlagwörter

Stichwörter der Autor:innen

drug delivery systemspolysaccharide scaffoldsvitamin B1

Autor:innen und Institutionen

  • Advanced Polymer Materials Group, National Polytechnic University of Science and Technology Bucharest, 1-7 Gh. Polizu Street, 011061 Bucharest, Romania.
  • C.D. Nenițescu" Institute of Organic and Supramolecular Chemistry, 202-B Spl. Independentei, 060023 Bucharest, Romania.
  • Faculty of Medical Engineering, National University for Science and Technology Politehnica Bucuresti, 1-7 Gh. Polizu Street, 011061 Bucharest, Romania.
  • Department of Science and Engineering of Oxide Materials and Nanomaterials, Faculty of Applied Chemistry and Material Science, National Polytechnic University of Science and Technology Bucharest, 1-7 Gh. Polizu Street,…
  • Academy of Romanian Scientists, 54 Splaiul Independentei, 050094 Bucharest, Romania.

ORCID-Profile: Andrada Serafim, George Mihail Vlăsceanu

Förderung

  • National University for Science and Technology Politehnica București

Zitieren

APA

Stavarache, C., Ghebaur, A., Serafim, A., Vlăsceanu, G. M., Vasile, E., Gârea, S. A., & Iovu, H. (2024). Fabrication of k-Carrageenan/Alginate/Carboxymethyl Cellulose basedScaffolds via 3D Printing for Potential Biomedical Applications. Polymers, 16(11), 1592. https://doi.org/10.3390/polym16111592

Vancouver

Stavarache C, Ghebaur A, Serafim A, Vlăsceanu GM, Vasile E, Gârea SA, et al. Fabrication of k-Carrageenan/Alginate/Carboxymethyl Cellulose basedScaffolds via 3D Printing for Potential Biomedical Applications. Polymers. 2024;16(11):1592. doi:10.3390/polym16111592

BibTeX
@article{Stavarache2024,
  author = {Stavarache, Cristina and Ghebaur, Adi and Serafim, Andrada and Vlăsceanu, George Mihail and Vasile, Eugeniu and Gârea, Sorina Alexandra and Iovu, Horia},
  title = {Fabrication of k-Carrageenan/Alginate/Carboxymethyl Cellulose basedScaffolds via 3D Printing for Potential Biomedical Applications},
  journal = {Polymers},
  year = {2024},
  volume = {16},
  number = {11},
  pages = {1592},
  doi = {10.3390/polym16111592}
}
Kostenlos starten →