EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitOpen Access · CC BY 4.0

Lunar Regolith Geopolymer Concrete for In-Situ Construction of Lunar Bases: A Review

Xiaowei Zheng, Cong Zhao, Xiaoyan Sun, Weiwei Dong

Polymers · 03.06.2024 · 16 (11) · 1582

DOI: 10.3390/polym16111582 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Polymers, online erschienen am 03.06.2024. Verfasst von Xiaowei Zheng und 3 weiteren Autor:innen. Beteiligte Einrichtung: College of Civil Engineering and Architecture, Zhejiang University, Hangzhou 310058, China. Die Arbeit wurde bisher 45-mal zitiert (Crossref) und nennt 133 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science Foundation of China, Major Science and Technology Research Projects in China's Building Materials Industry, R&D Program of Zhejiang Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The construction of lunar bases represents a fundamental challenge for deep space exploration, lunar research, and the exploitation of lunar resources. In-situ resource utilization (ISRU) technology constitutes a pivotal tool for constructing lunar bases. Using lunar regolith to create geopolymers as construction materials offers multiple advantages as an ISRU technique. This paper discusses the principle of geopolymer for lunar regolith, focusing on the reaction principle of geopolymer. It also analyzes the applicability of geopolymer under the effects of the lunar surface environment and the differences between the highland and mare lunar regolith. This paper summarizes the characteristics of existing lunar regolith simulants and the research on the mechanical properties of lunar regolith geopolymers using lunar regolith simulants. Highland lunar regolith samples contain approximately 36% amorphous substances, the content of silicon is approximately 28%, and the ratios of Si/Al and Si/Ca are approximately 1.5 and 2.6, respectively. They are more suitable as precursor materials for geopolymers than mare samples. The compressive strength of lunar regolith geopolymer is mainly in the range of 18~30 MPa. Sodium silicate is the most commonly utilized activator for lunar regolith geopolymers; alkalinity in the range of 7% to 10% and modulus in the range of 0.8 to 2.0 are suitable. A vacuum environment and multiple temperature cycles reduce the mechanical properties of geopolymers by 8% to 70%. Future research should be concentrated on the precision control of the lunar regolith’s chemical properties and the alkali activation efficacy of geopolymers in the lunar environment.

Schlagwörter

Stichwörter der Autor:innen

ISRUgeopolymerlunar regolith simulantsmechanical property

Autor:innen und Institutionen

  • College of Civil Engineering and Architecture, Zhejiang University, Hangzhou 310058, China.
  • Shanxi-Zheda Institute of New Materials and Chemical Engineering, Taiyuan 030001, China.
  • Centre for Balance Architecture, Zhejiang University, Hangzhou 310063, China.

Förderung

  • National Science Foundation of China
  • Major Science and Technology Research Projects in China's Building Materials Industry
  • R&D Program of Zhejiang Province
  • Shanxi-Zheda Institute of New Materials and Chemical Engineering
  • Major Science and Technology Research Projects in China’s Building Materials Industry
  • R&D Program of Zhejiang Province

Zitieren

APA

Zheng, X., Zhao, C., Sun, X., & Dong, W. (2024). Lunar Regolith Geopolymer Concrete for In-Situ Construction of Lunar Bases: A Review. Polymers, 16(11), 1582. https://doi.org/10.3390/polym16111582

Vancouver

Zheng X, Zhao C, Sun X, Dong W. Lunar Regolith Geopolymer Concrete for In-Situ Construction of Lunar Bases: A Review. Polymers. 2024;16(11):1582. doi:10.3390/polym16111582

BibTeX
@article{Zheng2024,
  author = {Zheng, Xiaowei and Zhao, Cong and Sun, Xiaoyan and Dong, Weiwei},
  title = {Lunar Regolith Geopolymer Concrete for In-Situ Construction of Lunar Bases: A Review},
  journal = {Polymers},
  year = {2024},
  volume = {16},
  number = {11},
  pages = {1582},
  doi = {10.3390/polym16111582}
}
Kostenlos starten →