Fabrication of Waterborne Silicone-Modified Polyurethane Nanofibers for Nonfluorine Elastic Waterproof and Breathable Membranes
Polymers · 25.05.2024 · 16 (11) · 1505
DOI: 10.3390/polym16111505 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 25.05.2024. Verfasst von Fang Li und 7 weiteren Autor:innen. Beteiligte Einrichtung: Interdisciplinary Graduate School of Science and Technology, Shinshu University, 3-15-1, Tokida, Ueda-shi 386-8567, Nagano, Japan. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 62 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: ShinEtsu Chemical (Japan), Shin-Etsu Chemical Co. Ltd..
Abstract (Originalsprache)
Waterproof and breathable membranes have a huge market demand in areas, such as textiles and medical protection. However, existing fluorinated nanofibrous membranes, while possessing good waterproof and breathable properties, pose health and environmental hazards. Consequently, fabricating fluorine-free, eco-friendly waterborne membranes by integrating outstanding waterproofing, breathability, and robust mechanical performance remains a significant challenge. Herein, we successfully prepared waterborne silicone-modified polyurethane nanofibrous membranes with excellent elasticity, waterproofing, and breathability properties through waterborne electrospinning, using a small quantity of poly(ethylene oxide) as a template polymer and in situ doping of the poly(carbodiimide) crosslinking agent, followed by a simple hot-pressing treatment. The silicone imparted the nanofibrous membrane with high hydrophobicity, and the crosslinking agent enabled its stable porous structure. The hot-pressing treatment (120 °C) further reduced the pore size and improved the water resistance. This environmentally friendly nanofibrous membrane showed a high elongation at break of 428%, an ultra-high elasticity of 67.5% (160 cycles under 400% tensile strain), an air transmission of 13.2 mm s−1, a water vapor transmission rate of 5476 g m−2 d−1, a hydrostatic pressure of 51.5 kPa, and a static water contact angle of 137.9°. The successful fabrication of these environmentally friendly, highly elastic membranes provides an important reference for applications in healthcare, protective textiles, and water purification.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Interdisciplinary Graduate School of Science and Technology, Shinshu University, 3-15-1, Tokida, Ueda-shi 386-8567, Nagano, Japan.
- International Joint Laboratory of New Textile Materials and Textiles of Henan Province, Zhongyuan University of Technology, Zhengzhou 450007, China.
- Silicone-Electronics Materials Research Center, Shin-Etsu Chemical Co., Ltd., 1-10, Hitomi, Matsuida-Machi, Annaka-shi 379-0224, Gunma, Japan.
- Dainichiseika Color & Chemicals Mfg. Co., Ltd., 2087-4, Ohta, Sakura-shi 285-0808, Chiba, Japan.
ORCID-Profile: Fang Li, Toshihisa Tanaka
Förderung
- ShinEtsu Chemical (Japan)
- Shin-Etsu Chemical Co. Ltd.
Zitieren
APA
Li, F., Weng, K., Tanaka, T., He, J., Zheng, H., Noda, D., Irifune, S., & Sato, H. (2024). Fabrication of Waterborne Silicone-Modified Polyurethane Nanofibers for Nonfluorine Elastic Waterproof and Breathable Membranes. Polymers, 16(11), 1505. https://doi.org/10.3390/polym16111505
Vancouver
Li F, Weng K, Tanaka T, He J, Zheng H, Noda D, et al. Fabrication of Waterborne Silicone-Modified Polyurethane Nanofibers for Nonfluorine Elastic Waterproof and Breathable Membranes. Polymers. 2024;16(11):1505. doi:10.3390/polym16111505
BibTeX
@article{Li2024,
author = {Li, Fang and Weng, Kai and Tanaka, Toshihisa and He, Jianxin and Zheng, Haimin and Noda, Daisuke and Irifune, Shinji and Sato, Hiromasa},
title = {Fabrication of Waterborne Silicone-Modified Polyurethane Nanofibers for Nonfluorine Elastic Waterproof and Breathable Membranes},
journal = {Polymers},
year = {2024},
volume = {16},
number = {11},
pages = {1505},
doi = {10.3390/polym16111505}
}
EUVIMED