EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitOpen Access · CC BY 4.0

State-of-the-Art on Advancements in Carbon–Phenolic and Carbon–Elastomeric Ablatives

Amit Kumar, Chikesh Ranjan, Kaushik Kumar iD, M Harinatha Reddy, B Sridhar Babu, Jitendra Kumar Katiyar iD

Polymers · 22.05.2024 · 16 (11) · 1461

DOI: 10.3390/polym16111461 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Polymers, online erschienen am 22.05.2024. Verfasst von Amit Kumar und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, RTC Institute of Technology, Ranchi 835219, India. Die Arbeit wurde bisher 20-mal zitiert (Crossref) und nennt 88 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Ablative composites serve as sacrificial materials, protecting underlying materials from high-temperature environments by endothermic reactions. These materials undergo various phenomena, including thermal degradation, pyrolysis, gas generation, char formation, erosion, gas flow, and different modes of heat transfer (such as conduction, convection, and radiation), all stemming from these endothermic reactions. These phenomena synergize to form a protective layer over the underlying materials. Carbon, with its superb mechanical properties and various available forms, is highlighted, alongside phenolics known for good adhesion and fabric ability and elastomers valued for flexibility and resilience. This study focuses on recent advancements in carbon-and-phenolic and carbon-and-elastomeric composites, considering factors such as erosion speed; high-temperature resistance; tensile, bending, and compressive strength; fiber–matrix interaction; and char formation. Various authors’ calculations regarding the percentage reduction in linear ablation rate (LAR) and mass ablation rate (MAR) are discussed. These analyses inform potential advancements in the field of carbon/phenolic and carbon/elastomeric ablative composites.

Schlagwörter

Stichwörter der Autor:innen

ablativecarboncarbon and elastomeric compositescarbon and phenolic compositeselastomeric resinlinear ablation rate (LAR)mass ablation rate (MAR)phenolic resinpyrolysisthermal protection system (TPS)thermal resistance

Autor:innen und Institutionen

  • Department of Mechanical Engineering, RTC Institute of Technology, Ranchi 835219, India.
  • Department of Mechanical Engineering, National Institute of Technology, Rourkela 769005, India.
  • Department of Mechanical Engineering, Birla Institute of Technology, Ranchi 835215, India.
  • Department of Mechanical Engineering, CVR Engineering College, Hyderabad 501510, India.
  • Department of Mechanical Engineering, Malla Reddy Engineering College, Hyderabad 500088, India.
  • Centre for Research Impact and Outcome, Chitkara University, Chandigarh-Patiala National Highway (NH-7), Rajpura 140401, India.

ORCID-Profile: Kaushik Kumar, Jitendra Kumar Katiyar

Zitieren

APA

Kumar, A., Ranjan, C., Kumar, K., Reddy, M. H., Babu, B. S., & Katiyar, J. K. (2024). State-of-the-Art on Advancements in Carbon–Phenolic and Carbon–Elastomeric Ablatives. Polymers, 16(11), 1461. https://doi.org/10.3390/polym16111461

Vancouver

Kumar A, Ranjan C, Kumar K, Reddy MH, Babu BS, Katiyar JK. State-of-the-Art on Advancements in Carbon–Phenolic and Carbon–Elastomeric Ablatives. Polymers. 2024;16(11):1461. doi:10.3390/polym16111461

BibTeX
@article{Kumar2024,
  author = {Kumar, Amit and Ranjan, Chikesh and Kumar, Kaushik and Reddy, M Harinatha and Babu, B Sridhar and Katiyar, Jitendra Kumar},
  title = {State-of-the-Art on Advancements in Carbon–Phenolic and Carbon–Elastomeric Ablatives},
  journal = {Polymers},
  year = {2024},
  volume = {16},
  number = {11},
  pages = {1461},
  doi = {10.3390/polym16111461}
}
Kostenlos starten →