EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Three-Dimensional Bioprinting of GelMA Hydrogels with Culture Medium: Balancing Printability, Rheology and Cell Viability for Tissue Regeneration

Laura Mendoza-Cerezo iD, Jesús M Rodríguez-Rego iD, Antonio Macías-García iD, Antuca Callejas-Marín, Luís Sánchez-Guardado, Alfonso C Marcos-Romero iD

Polymers · 19.05.2024 · 16 (10) · 1437

DOI: 10.3390/polym16101437 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 19.05.2024. Verfasst von Laura Mendoza-Cerezo und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Graphic Expression, School of Industrial Engineering, University of Extremadura, Avenida de Elvas, s/n, 06006 Badajoz, Spain. Die Arbeit wurde bisher 26-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Regional Development Fund.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Three-dimensional extrusion bioprinting technology aims to become a fundamental tool for tissue regeneration using cell-loaded hydrogels. These biomaterials must have highly specific mechanical and biological properties that allow them to generate biosimilar structures by successive layering of material while maintaining cell viability. The rheological properties of hydrogels used as bioinks are critical to their printability. Correct printability of hydrogels allows the replication of biomimetic structures, which are of great use in medicine, tissue engineering and other fields of study that require the three-dimensional replication of different tissues. When bioprinting cell-loaded hydrogels, a small amount of culture medium can be added to ensure adequate survival, which can modify the rheological properties of the hydrogels. GelMA is a hydrogel used in bioprinting, with very interesting properties and rheological parameters that have been studied and defined for its basic formulation. However, the changes that occur in its rheological parameters and therefore in its printability, when it is mixed with the culture medium necessary to house the cells inside, are unknown. Therefore, in this work, a comparative study of GelMA 100% and GelMA in the proportions 3:1 (GelMA 75%) and 1:1 (GelMA 50%) with culture medium was carried out to determine the printability of the gel (using a device of our own invention), its main rheological parameters and its toxicity after the addition of the medium and to observe whether significant differences in cell viability occur. This raises the possibility of its use in regenerative medicine using a 3D extrusion bioprinter.

Schlagwörter

Stichwörter der Autor:innen

GelMAbiomaterialsbioprintingprintabilityrheology

Autor:innen und Institutionen

  • Department of Graphic Expression, School of Industrial Engineering, University of Extremadura, Avenida de Elvas, s/n, 06006 Badajoz, Spain.
  • Department of Mechanical, Energy and Materials Engineering, School of Industrial Engineering, University of Extremadura, Avenida de Elvas, s/n, 06006 Badajoz, Spain.
  • Department of Anatomy, Cell Biology and Zoology, Faculty of Science, University of Extremadura, Avenida de Elvas, s/n, 06006 Badajoz, Spain.

ORCID-Profile: Laura Mendoza-Cerezo, Jesús M Rodríguez-Rego, Antonio Macías-García, Alfonso C Marcos-Romero

Förderung

  • European Regional Development Fund

Zitieren

APA

Mendoza-Cerezo, L., Rodríguez-Rego, J. M., Macías-García, A., Callejas-Marín, A., Sánchez-Guardado, L., & Marcos-Romero, A. C. (2024). Three-Dimensional Bioprinting of GelMA Hydrogels with Culture Medium: Balancing Printability, Rheology and Cell Viability for Tissue Regeneration. Polymers, 16(10), 1437. https://doi.org/10.3390/polym16101437

Vancouver

Mendoza-Cerezo L, Rodríguez-Rego JM, Macías-García A, Callejas-Marín A, Sánchez-Guardado L, Marcos-Romero AC. Three-Dimensional Bioprinting of GelMA Hydrogels with Culture Medium: Balancing Printability, Rheology and Cell Viability for Tissue Regeneration. Polymers. 2024;16(10):1437. doi:10.3390/polym16101437

BibTeX
@article{MendozaCerezo2024,
  author = {Mendoza-Cerezo, Laura and Rodríguez-Rego, Jesús M and Macías-García, Antonio and Callejas-Marín, Antuca and Sánchez-Guardado, Luís and Marcos-Romero, Alfonso C},
  title = {Three-Dimensional Bioprinting of GelMA Hydrogels with Culture Medium: Balancing Printability, Rheology and Cell Viability for Tissue Regeneration},
  journal = {Polymers},
  year = {2024},
  volume = {16},
  number = {10},
  pages = {1437},
  doi = {10.3390/polym16101437}
}
Kostenlos starten →