EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Eco-Friendly Poly (Butylene Adipate-co-Terephthalate) Coated Bi-Layered Films: An Approach to Enhance Mechanical and Barrier Properties

Raja Venkatesan iD, Krishnapandi Alagumalai, Alexandre A Vetcher iD, Bandar Ali Al-Asbahi iD, Seong-Cheol Kim

Polymers · 03.05.2024 · 16 (9) · 1283

DOI: 10.3390/polym16091283 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 03.05.2024. Verfasst von Raja Venkatesan und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Chemical Engineering, Yeungnam University, 280 Daehak-Ro, Gyeongsan 38541, Republic of Korea. Die Arbeit wurde bisher 15-mal zitiert (Crossref) und nennt 59 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Research Foundation of Korea, Ministry of Education.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this research work, a coated paper was prepared with poly (butylene adipate-co-terephthalate) (PBAT) film to explore its use in eco-friendly food packaging. The paper was coated with PBAT film for packaging using hot pressing, a production method currently employed in the packaging industry. The coated papers were evaluated for their structural, mechanical, thermal, and barrier properties. The structural morphology and chemical analysis of the coated paper confirmed the consistent formation of PBAT bi-layered on paper surfaces. Surface coating with PBAT film increased the water resistance of the paper samples, as demonstrated by tests of barrier characteristics, including the water vapor transmission rate (WVTR), oxygen transmission rate (OTR), and water contact angle (WCA) of water drops. The transmission rate of the clean paper was 2010.40 cc m−2 per 24 h for OTR and 110.24 g m−2 per 24 h for WVTR. If the PBAT-film was coated, the value decreased to 91.79 g m−2 per 24 h and 992.86 cc m−2 per 24 h. The hydrophobic nature of PBAT, confirmed by WCA measurements, contributed to the enhanced water resistance of PBAT-coated paper. This result presents an improved PBAT-coated paper material, eliminating the need for adhesives and allowing for the fabrication of bi-layered packaging.

Schlagwörter

Stichwörter der Autor:innen

coatingsfood packagingpaperpoly(butylene adipate-co-terephthalate)-(PBAT)tensile strength

Autor:innen und Institutionen

  • School of Chemical Engineering, Yeungnam University, 280 Daehak-Ro, Gyeongsan 38541, Republic of Korea.
  • Institute of Biochemical Technology and Nanotechnology, Peoples' Friendship University of Russia n.a. P. Lumumba (RUDN), 6 Miklukho-Maklaya St., 117198 Moscow, Russia.
  • Department of Physics and Astronomy, College of Science, King Saud University, P.O. Box 2455, Riyadh 11451, Saudi Arabia.

ORCID-Profile: Raja Venkatesan, Alexandre A Vetcher, Bandar Ali Al-Asbahi

Förderung

  • National Research Foundation of Korea
  • Ministry of Education

Zitieren

APA

Venkatesan, R., Alagumalai, K., Vetcher, A. A., Al-Asbahi, B. A., & Kim, S. C. (2024). Eco-Friendly Poly (Butylene Adipate-co-Terephthalate) Coated Bi-Layered Films: An Approach to Enhance Mechanical and Barrier Properties. Polymers, 16(9), 1283. https://doi.org/10.3390/polym16091283

Vancouver

Venkatesan R, Alagumalai K, Vetcher AA, Al-Asbahi BA, Kim SC. Eco-Friendly Poly (Butylene Adipate-co-Terephthalate) Coated Bi-Layered Films: An Approach to Enhance Mechanical and Barrier Properties. Polymers. 2024;16(9):1283. doi:10.3390/polym16091283

BibTeX
@article{Venkatesan2024,
  author = {Venkatesan, Raja and Alagumalai, Krishnapandi and Vetcher, Alexandre A and Al-Asbahi, Bandar Ali and Kim, Seong-Cheol},
  title = {Eco-Friendly Poly (Butylene Adipate-co-Terephthalate) Coated Bi-Layered Films: An Approach to Enhance Mechanical and Barrier Properties},
  journal = {Polymers},
  year = {2024},
  volume = {16},
  number = {9},
  pages = {1283},
  doi = {10.3390/polym16091283}
}
Kostenlos starten →