Preparation, Air Filtration Performance of a Fluorinated Polyimide/Polyacrylonitrile Nanofibrous Membrane by Electrospinning
Polymers · 29.04.2024 · 16 (9) · 1240
DOI: 10.3390/polym16091240 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 29.04.2024. Verfasst von Chen Chen und 3 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials Science and Engineering, Shanghai University of Engineering Science, Shanghai 201620, China. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: science and technology innovation Program of Hunan Province, Central Government Guides Local Science and Technology Development Project.
Abstract (Originalsprache)
This paper reports the successful fabrication of a new nanofibrous membrane, F-PI/PAN, through electrospinning of polyacrylonitrile (PAN) and fluorinated polyimide (F-PI). The nanofibrous membrane exhibits comprehensive properties for high-temperature filtration and robust PM2.5 (particulate matter with an aerodynamic equivalent diameter of 2.5 microns or less) removal. The introduction of F enhances the hydrophobicity of the PI. The relationship between the hydrophobic performance and the filtration performance of particles is investigated. The chemical group of the composite membrane was demonstrated using FITR, while the surface morphology was investigated using field emission scanning electron microscopy. The TGA results indicated good thermal stability at 300 °C. Various ratios of F-PI membranes were prepared to characterize the change in properties, with the optimal mass ratio of F-PI being 20 wt%. As the proportion of F-PI increases, its mechanical and filtration efficiency properties and hydrophobicity become stronger. The contact angle reaches its maximum of 128 ± 5.2° when PAN:F-PI = 6:4. Meanwhile, when PAN:F-PI = 8:2, the filtration efficiency reaches 99.4 ± 0.3%, and the elongation at break can reach 76%. The fracture strength can also reach 7.1 MPa, 1.63 times that of the pure PAN membrane.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Materials Science and Engineering, Shanghai University of Engineering Science, Shanghai 201620, China.
- Key Laboratory of High Performance Fibers & Products, Ministry of Education, Donghua University, Shanghai 201620, China.
- Shanghai Dajue Packaging Products Co., Shanghai 201620, China.
- Energy Bureau of Xiangyuan County, Changzhi 046200, China.
Förderung
- science and technology innovation Program of Hunan Province
- Central Government Guides Local Science and Technology Development Project
Zitieren
APA
Chen, C., Xiong, L., Cui, Y., & Wang, C. (2024). Preparation, Air Filtration Performance of a Fluorinated Polyimide/Polyacrylonitrile Nanofibrous Membrane by Electrospinning. Polymers, 16(9), 1240. https://doi.org/10.3390/polym16091240
Vancouver
Chen C, Xiong L, Cui Y, Wang C. Preparation, Air Filtration Performance of a Fluorinated Polyimide/Polyacrylonitrile Nanofibrous Membrane by Electrospinning. Polymers. 2024;16(9):1240. doi:10.3390/polym16091240
BibTeX
@article{Chen2024,
author = {Chen, Chen and Xiong, Lulu and Cui, Yahui and Wang, Chaosheng},
title = {Preparation, Air Filtration Performance of a Fluorinated Polyimide/Polyacrylonitrile Nanofibrous Membrane by Electrospinning},
journal = {Polymers},
year = {2024},
volume = {16},
number = {9},
pages = {1240},
doi = {10.3390/polym16091240}
}
EUVIMED