EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Multiscale Modeling and Characterization of Graphene Epoxy Nanocomposite

Collins Ekeowa, S D Jacob Muthu iD

Polymers · 26.04.2024 · 16 (9) · 1209

DOI: 10.3390/polym16091209 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 26.04.2024. Verfasst von Collins Ekeowa und 1 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Engineering and Applied Science, University of Regina, Regina, SK S4S 0A2, Canada. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study aims to characterize graphene epoxy nanocomposite properties using multiscale modeling. Molecular dynamics was used to study the nanocomposite at the nanoscale and finite element analysis at the macroscale to complete the multiscale modeling. The coupling of these two scales was carried out using the Irving–Kirkwood averaging method. First, the functionalization of graphene was carried and 6% grafted graphene was selected based on Young’s modulus and the tensile strength of the grafted graphene sheet. Functionalized graphene with weight fractions of 1.8, 3.7, and 5.6 wt.% were reinforced with epoxy polymer to form a graphene epoxy nanocomposite. The results showed that the graphene with 3.7 wt.% achieved the highest modulus. Subsequently, a functionalized graphene sheet with an epoxy matrix was developed to obtain the interphase properties using the MD modeling technique. The normal and shear forces at the interphase region of the graphene epoxy nanocomposite were investigated using a traction-separation test to analyze the mechanical properties including Young’s modulus and traction forces. The mean stiffness of numerically tested samples with 1.8, 3.7, and 5.6 wt.% graphene and the stiffness obtained from experimental results from the literature were compared. The experimental results are lower than the multiscale model results because the experiments cannot replicate the molecular-scale behavior. However, a similar trend could be observed for the addition of up to 3.7 wt.% graphene. This demonstrated that the graphene with 3.7 wt.% shows improved interphase properties. The macroscale properties of the graphene epoxy nanocomposite models with 1.8 and 3.7 wt.% were comparatively higher.

Schlagwörter

Stichwörter der Autor:innen

interphase propertiesmolecular dynamicsmultiscale modelingpolymer nanocomposites

Autor:innen und Institutionen

  • Faculty of Engineering and Applied Science, University of Regina, Regina, SK S4S 0A2, Canada.

ORCID-Profile: S D Jacob Muthu

Zitieren

APA

Ekeowa, C., & Muthu, S. D. J. (2024). Multiscale Modeling and Characterization of Graphene Epoxy Nanocomposite. Polymers, 16(9), 1209. https://doi.org/10.3390/polym16091209

Vancouver

Ekeowa C, Muthu SDJ. Multiscale Modeling and Characterization of Graphene Epoxy Nanocomposite. Polymers. 2024;16(9):1209. doi:10.3390/polym16091209

BibTeX
@article{Ekeowa2024,
  author = {Ekeowa, Collins and Muthu, S D Jacob},
  title = {Multiscale Modeling and Characterization of Graphene Epoxy Nanocomposite},
  journal = {Polymers},
  year = {2024},
  volume = {16},
  number = {9},
  pages = {1209},
  doi = {10.3390/polym16091209}
}
Kostenlos starten →